Introduction: TLS100 digital spring tension and pressure testing machine is made according to the technical requirements stipulated by the national spring testing machine standard. The professionally designed automatic control and data acquisition system realizes all-digital adjustment of the data acquisition and control process. Capable of tension, pressure, displacement, and stiffness strength tests on tension springs, compression springs, disc springs, tower springs, leaf springs, retainer springs, leaf springs, composite springs, gas springs, die springs, and special springs, etc. And analysis. Technical Parameters: Model: TLS-S100 Maximum experimental force: 100N Tester level: Level 1 (0.5 optional) Range: 2%-100%FS (0.4%-100% optional) Displacement minimum resolution: 0.01mm Tensile Test Maximum Distance Between Two Platens: 750mm Compression test the maximum distance between the two pressure plates: 700mm Upper and lower plate diameter: Ø100mm Speed: 0.05mm/min to 500mm/min is arbitrarily set Displacement speed control accuracy: ±1% Deformation indication error: ≤±(50+0.15L) Power supply: 220V, 50Hz
Introduction: TLS100 digital spring tension and pressure testing machine is made according to the technical requirements stipulated by the national spring testing machine standard. The professionally designed automatic control and data acquisition system realizes all-digital adjustment of the data acquisition and control process. Capable of tension, pressure, displacement, and stiffness strength tests on tension springs, compression springs, disc springs, tower springs, leaf springs, retainer springs, leaf springs, composite springs, gas springs, die springs, and special springs, etc. And analysis.
