Introduction: TLS-S50～2000 digital spring tension and compression testing machine (manual) is made according to the technical requirements stipulated by the national spring testing machine standard, mainly used to test tension spring, compression spring, disc spring, tower spring, leaf spring, retainer spring, The tensile strength, pressure, displacement, and stiffness of the precision springs such as sheet springs, compound springs, gas springs, mold springs, and special-shaped springs are tested and analyzed. Features: 1 It can measure spring tension, pressure, stiffness, displacement, display date, number, etc. 2Using large-scale integrated circuits to improve test accuracy and intuitive human-machine dialogue 3 Special spring detection program designed according to national standards, high efficiency, full function, easy operation 4 from the mechanical principles and program software to improve the measurement range of the measurement range 5 It is suitable for batch testing, sorting of springs on the production line, and also suitable for precision sampling of laboratories. 6 can be the force value, displacement, stiffness and other data form a standard test report to print 7 with programmable and mechanical two-level limit protection Technical Parameters: Model: TLS-S50 Maximum experimental force: 50N Experiment level: Level 1 Test force minimum reading: 0.01N Displacement minimum resolution: 0.001mm Tensile test Maximum distance between two platens: 80mm Compression test the maximum distance between the two pressure plates: 70mm Upper and lower plate diameter: Ø100mm The pressure plate drops and rises:
Introduction: TLS-S50～2000 digital spring tension and compression testing machine (manual) is made according to the technical requirements stipulated by the national spring testing machine standard, mainly used to test tension spring, compression spring, disc spring, tower spring, leaf spring, retainer spring, The tensile strength, pressure, displacement, and stiffness of the precision springs such as sheet springs, compound springs, gas springs, mold springs, and special-shaped springs are tested and analyzed.
