Introduction: The spring tension and compression tester is made according to the technical requirements specified in JB/T7796-2005 "Technical conditions of tensile compression spring testing machine". The spring tension and compression tester is mainly used for testing the strength of various coil springs and elastic elements, that is, testing the test force of the spring under a certain amount of deformation (or height) or measuring the height or deformation of the spring under a certain test force. . Features: 1 The use of control motor loading, ball screw drive, improve the test accuracy and ensure the test efficiency. 2 Set 1-5 test points at a time, automatically complete the test, and automatically return to the initial position. 3 Has peak hold, overload protection, mechanical limit, stiffness calculation, data query and other functions. Technical Parameters: Product model number: TLS-S100II Maximum test force: 100N Test force resolution: 0.01N Test force effective range: 2%-100% Displacement resolution: 0.01mm Loading speed: 1-500mm/min Maximum distance between two hooks: 300mm Tensile compression test stroke: 300mm Platen diameter: Φ100mm Net weight: 110Kg Power supply: 220V±10%, 50Hz Working conditions: 1, in the range of room temperature 10 °C ~ 35 °C, relative humidity ≤ 80%; 2, on a solid foundation or workbench; 3, in the environment without vibration and non-corrosive media around; 4. The fluctuation range of the power supply voltage should not exceed ±10% of the rated voltage.
Introduction: The spring tension and compression tester is made according to the technical requirements specified in JB/T7796-2005 "Technical conditions of tensile compression spring testing machine". The spring tension and compression tester is mainly used for testing the strength of various coil springs and elastic elements, that is, testing the test force of the spring under a certain amount of deformation (or height) or measuring the height or deformation of the spring under a certain test force. .
