Tissuelyser-192L Multi Sample Tissue Grinding Instrument Introduction: The Tissuelser tissue grinder is a special, fast, efficient, and multi tube consistent system. It can extract and purify raw DNA, RNA, and proteins from any source, including soil, plant and animal tissues/organs, bacteria, yeast, fungi, spores, paleontological specimens, etc. Place the sample and grinding ball into the grinder (equipped with a grinding tank or centrifuge tube/adapter), and under high-frequency oscillation, the grinding ball will collide and rub back and forth at high speed in the grinder, completing the grinding, crushing, mixing, and cell wall breaking of the sample in a very short time. characteristic: 1. Multiple operations with good results Efficient and fast work can complete the grinding of up to 2X24, 2x48, 4x96 samples in one minute. Time and effort saving, small inter batch and intra batch differences, extracted proteins with higher specific activity and longer nucleic acid fragments. The maximum speed can reach 70Hz, which is equivalent to 2100 times per minute. 2. No cross contamination The sample tube is in a fully enclosed state during the crushing process, and disposable centrifuge tubes and beads can be used. The samples are kept intact in the tube to avoid cross contamination between samples and external contamination. 3. Easy to operate 3.1 Built in program controller, which can set parameters such as grinding time and rotor vibration frequency; 3.2 Humanized operation interface; 4. Good safety and stability 4.1 Equipped with an open cover protection device, using vertical oscillation mode for more thorough grinding and better stability; During the operation of the instrument, the noise level should be less than 55dB and should not interfere with other experiments or instruments; 5. Convenient low-temperature operation When a low-temperature grinding environment is required, the adapter containing the sample can be immersed in liquid nitrogen and cooled for 1-2 minutes. After removal, it can be quickly fixed on the host to start grinding without the need for further freezing treatment, saving liquid nitrogen. 6. Good repeatability Set the same procedure for the same organizational sample to achieve the same grinding effect; The working time is short, and the sample temperature will not rise. Technical parameters: Application areas: Organization homogenization, grinding, cell lysis, homogenization, material dispersion, preparation, sample mixing, oscillation Processing sample sizes of 384 * (0.2-0.5mL), 192 * 2mL, 48 * 5mL, 24 * (7-15) mL, 4 * 25mL, 2 * 50mL There is no requirement for the size of the incoming and outgoing materials, according to the size of the adapter; Discharge particle size~5um Homogenization speed 0-70 HZ/s, oscillation frequency 300-4000 times/min Grinding ball diameter/material 0.1-30mm/stainless steel, chromium steel, zirconia, tungsten carbide, quartz sand Grinding methods include wet grinding, dry grinding, and low-temperature grinding Dimensions 400 * 520 * 660 Weight 60KG LCD display with touch screen for convenient and intuitive operation Working time 0-9999s, users can set it themselves Accelerate/decelerate to reach high speed within 2 seconds/reach low speed within 2 seconds Noise level ＜ 55dB What is the upgradable freezing function
Introduction: The Tissuelser tissue grinder is a special, fast, efficient, and multi tube consistent system. It can extract and purify raw DNA, RNA, and proteins from any source, including soil, plant and animal tissues/organs, bacteria, yeast, fungi, spores, paleontological specimens, etc. Place the sample and grinding ball into the grinder (equipped with a grinding tank or centrifuge tube/adapter), and under high-frequency oscillation, the grinding ball will collide and rub back and forth at high speed in the grinder, completing the grinding, crushing, mixing, and cell wall breaking of the sample in a very short time.
