TIME7232 Portable Vibrometer Introduction
The TIME7232 portable vibrometer uses a piezoelectric acceleration sensor to convert the vibration signal into an electrical signal. Through the processing and analysis of the input signal, it shows the acceleration, velocity, displacement value or spectrum chart of the vibration; its technical performance is in line with international standards ISO2954 and China's national standard GB / T13824 requirements for vibration intensity measuring instrument and GB13823 3 sine excitation method vibration standards. TIME7232 portable vibrometer is used in conventional vibration measurement, especially in rotary or reciprocating machinery. It is widely used in electric power, petrochemical, machinery manufacturing, metallurgy, vehicles and other fields. Features
There are three display modes: numeric type, spectrum type, special type;
It has a powerful storage function: it can store 100 × 100 sets of measurement results (100 measuring points, each set of data stores 100 sets of data) and 100 spectrum charts (each measurement point stores a spectrum chart)
The instrument can display the measurement spectrum in real time;
The instrument can draw a histogram according to the set police line;
Simple fault diagnosis: display an alarm when the measured value exceeds the alarm value, the instrument automatically enters the spectrum analysis state, indicating that the measured value exceeds the limit;
Connected with micro printer, can print measurement data and spectrum chart;
Connect with a microcomputer to form a trend analysis chart and analyze measurement data (cooperate with the host computer software);
Display: 320 × 200 dot matrix LCD (with LED backlight);
Two kinds of probes can be selected: high sensitivity probe (small signal value), low sensitivity probe;
Comply with the requirements of the international standard ISO2954 and China's national standard GB / T13824 for vibration intensity measuring instrument and GB13823 3 sine excitation method vibration standard Technical Parameters
Measuring range: Acceleration: 0.1m / s²-20m / s² (peak value)
Speed: 0.01cm / s-4cm / s (effective value)
Displacement: 0.001mm-0.8mm (peak-peak value)
Frequency range: Acceleration: 10Hz-200Hz, 10Hz-500Hz, 10Hz-1KHz, 10Hz-10KHz
Speed: 10Hz-200Hz, 10Hz-500Hz, 10Hz-1KHz
Displacement: 10Hz-200Hz, 10Hz-500Hz
Allowable error: ± 5%
Temperature and humidity range: 0 ℃ -40 ℃; ≤80% RH
Power supply: Lithium battery (maximum 20 hours of continuous use without LED backlight)
Dimensions: 171mmX78.5mmX28mm
Weight: 230g
Introduction
The TIME7232 portable vibrometer uses a piezoelectric acceleration sensor to convert the vibration signal into an electrical signal. Through the processing and analysis of the input signal, it shows the acceleration, velocity, displacement value or spectrum chart of the vibration; its technical performance is in line with international standards ISO2954 and China's national standard GB / T13824 requirements for vibration intensity measuring instrument and GB13823 3 sine excitation method vibration standards. TIME7232 portable vibrometer is used in conventional vibration measurement, especially in rotary or reciprocating machinery. It is widely used in electric power, petrochemical, machinery manufacturing, metallurgy, vehicles and other fields.
