Brief introduction: The current test methods available now have a variety of hardness, more common are brinell, rockwell, vickers, such as test method on the Richter scale. The brinell, rockwell test force, indentation, on the sample surface damage is bigger, vickers measured by optical method, need to be very professional and technical personnel operation, and cannot be tested directly for large workpiece, and the ultrasonic hardness tester TIME5620 ultrasonic hardness tester adopts ultrasonic contact impedance method to measure samples to compare, with high precision, high speed, easily portable, simple operation, the advantages of nondestructive measuring. Features: 1. The high accuracy of measurement 2. Test indentation 3. Measurement speed is fast 4. The large screen display 5. Mass storage 6. Simple correction Technical parameters: Test scope: 50-1599 HV, HRC 20.3 ~ 76, HB 76 ~ 618, 41 ~ 100 HRB, HRA in 61-85.6, Mpa n/was 255 ~ 2180 Test direction: support 360 °, as long as the pressure head and the measured surface into 90 ° + / - 5 ° Angle, can measure operation; Hardness value formats: vickers (HV), rockwell C (HRC), brinell (HB), etc. The battery specification: 4.2 V, 4800 mah lithium batteries; Battery life: 10 hours; The ultrasonic hardness tester host specification: 162 * 81 * 31 mm; Probe specifications: Φ 22 x 153 mm; Total weight: 755 g.
Brief introduction: The current test methods available now have a variety of hardness, more common are brinell, rockwell, vickers, such as test method on the Richter scale. The brinell, rockwell test force, indentation, on the sample surface damage is bigger, vickers measured by optical method, need to be very professional and technical personnel operation, and cannot be tested directly for large workpiece,
