TIME®3201 3202 handheld roughness tester Introduction
The hand-held roughness meter is suitable for cold rolled steel production site, scientific research laboratory and factory measurement room. The handheld roughness meter can measure the surface roughness of various machined parts, calculate the corresponding parameters according to the selected measurement conditions, clearly display all the measurement results and graphics on the liquid crystal display, and can be output on the printer, or Communicate with PC. With measured value storage and stored data query function. Features
High-precision inductive sensor;
19 roughness parameters can be measured and displayed;
Using DSP (Digital Signal Processor) for data processing and control, fast speed, low power consumption;
High quality lithium ion rechargeable battery, high capacity, no memory effect, continuous working for more than 20 hours;
Connected to the TA220S printer of the times, you can print the measurement parameters and contour graphics;
Standard RS232 interface, can communicate with PC;
Chinese and English menu interface;
LCD graphic display function;
Sensor pin position indication;
Automatic shutdown with storage function;
With measured value storage function and stored data query function;
With system self-checking function;
The system clock can be customized, the current clock is displayed when the computer is turned on, and the time is displayed when the measured value is stored;
It can measure Rk parameters and display Rk curve. Technical Parameters
Measurement parameters: Ra, Rz (ISO), Ry, Rq, Rt, Rp, Rv, Rz (JIS), Rmax, R3z, RSk, RS, RSm, RPc, Rk, Rpk, Rvk, Mr1, Mr2
Measuring range: Ra: 0.025-12.5μm
Display range: Ra, Rq: 0.005-16μm, Rz, Ry, Rt, Rp, Rv, Rmax, R3z, Rz (JIS): 0.02-160μm, RS, RSm: 1mm, Rmr: 0-100% (% Rt) , Rsk: 0-100%
Range: ± 20μm, ± 40μm, ± 80μm
Maximum display resolution: 0.001μm
Filtering method: RC, PC-RC, GAUSS, D-P
Sampling length: 0.25mm, 0.8mm, 2.5mm, automatic
Evaluation length: 1L-5L (optional), L is the sampling length
Measuring stroke length: 3L-7L (optional)
Maximum driving stroke length: 17.5mm / 0.71inch
Minimum driving stroke length: 1.3mm / 0.052inch
Indication error: ≤ ± 10%
Indication variability: ≤6%
Tip angle: 90 °
Display mode: 128 × 64 dot matrix LCD (with backlight)
Working environment: Temperature: 0ºC-40ºC, relative humidity: <90%
Weight: 440g
Dimensions: 140 × 52 × 48mm
Optional accessories for portable roughness tester:
TS110 curved sensor, TS120 small hole sensor, TS130 groove sensor, TS131 deep groove sensor, TA610 measuring platform, TA620 measuring platform, TA630 fine-tuning platform, TA631 fine-tuning platform, TA230 micro printer, lateral adapter rod, extension rod, V Blocks, connecting parts, drive connecting shafts, PC software
Introduction
The hand-held roughness meter is suitable for cold rolled steel production site, scientific research laboratory and factory measurement room. The handheld roughness meter can measure the surface roughness of various machined parts, calculate the corresponding parameters according to the selected measurement conditions, clearly display all the measurement results and graphics on the liquid crystal display, and can be output on the printer, or Communicate with PC. With measured value storage and stored data query function.
