TIME® 3222 Intelligent Roughness Tester Introduction
TIME®3222 high-performance roughness meter adopts dot-matrix color LCD touch screen, which is more convenient to control and display. The resolution reaches 320 × 480, which can display the entire roughness curve delicately. The split design of the host and the driver is used, the vertical amount is 400μm, and the range is increased, which is conducive to the measurement of the uneven surface. At full scale, the system resolution is 8 nanometers. The starting position C of the profile section can be customized to meet the requirements of quilting roughness measurement. The roughness curve measurement is more realistic, and the calculation of each parameter is more accurate. Digital modulation and demodulation, improve instrument measurement accuracy and anti-interference performance. The stylus position can be displayed, and the three calibration methods of average, peak and valley, and peak spacing can be adjusted; all parameters can be set with upper and lower limit alarms; one measurement can calculate and display the ISOR family parameters and the profile P family parameter. Can randomly store 10 sets of data. Built-in standard RS232 interface, USB interface. Standard RS232 serial interface and USB interface, connected to TA230 printer, can print parameters, contour graphics, support rate curve, amplitude distribution curve. Powerful PC software processing function (optional), can achieve more in-depth analysis of test results and test report processing.
The TIME® 3222 high-performance roughness tester has a compact design and is easy to carry. It is suitable for on-site measurement of roughness of various machined surfaces. The vertical range of the sensor is increased to 400μm, which has greater applicability to a workpiece with a large arc surface and other concave and convex undulations. Adopt the split design of the host and the driver, the compact driver is more flexible, and can be connected to the height ruler, various brackets, measurement platforms, etc. to achieve the surface measurement of many complex-shaped workpieces, even a certain arc surface, a certain inclination angle, various internal cavities Walls, tooth surfaces, grooves, etc. Through the selection of various sensors, it can solve a variety of small-aperture, small-diameter, curved surface, groove, deep groove and other field application problems. Features
The separate structure of the sensor and the host is conducive to the stable contact between the sensor and the measured surface;
Dot matrix LCD touch screen, resolution 320mm × 480mm, can display the whole section roughness curve delicately;
The vertical range of 50μm and 400μm can be adjusted; the vertical range of 400um, the range is increased, which is conducive to the measurement of uneven surfaces;
At full scale, the system resolution is 8 nanometers; the roughness curve measurement is more realistic, and the calculation of each parameter is more accurate;
Digital modulation and demodulation to improve instrument measurement accuracy and anti-interference performance;
The display of the stylus position; the three calibration methods of average value, peak-valley value and peak-to-peak distance are adjustable;
All parameters can be set to upper and lower limit alarm;
The starting position C of the profile section can be customized to meet the requirements of quilting roughness measurement;
One measurement can calculate and display ISOR family parameters and profile P family parameters;
Powerful PC host computer software processing function (optional)
Can randomly store 10 sets of data.
Built-in standard RS232 interface, USB interface;
Standard RS232 serial interface and USB interface, connected to TA230 printer, can print parameters, contour graphics, support rate curve, amplitude distribution curve. Technical Parameters
Technical parameters: Ra, Rp, Rv, Rt, Rz, Rq, Rsk, Rku, Rc, Rpc, Rsm, Rmr (C), tp, Rmr, Rpm, Rz1max, RzJIS, Rmax, Htp, Rδc, RΔq, RΔa, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
Pa, Pp, Pv, Pt, Pz, Pq, Psk, Pku, Pc, PSm, Pmr (c), Pmr, Pz1max, PzJIS, Pδc, P △ q
Sensor
Measuring principle: inductive
Measuring range: 400μm
Tip radius: 5μm
Tip material: diamond
Stylus force measurement: 4mN
Stylus angle: 90 °
Longitudinal radius of guide head: 45mm
Maximum driving stroke: 19mm
Range and resolution
Range: ± 25μm ± 200μm
Resolution: 0.001μm 0.008μm
Filtering method: GAUSS, 2RC, ISO13565
Sampling length: 0.25mm, 0.8mm, 2.5mm, automatic
Evaluation length: 1L ～ 5L (optional, L is the sampling length)
Indication error: ± 10%
Indication repeatability: ≤6%
Working environment: Temperature: 0ºC ～ 40ºC
Relative humidity: <90% RH
Dimensions and weight: Host: 155.4mm × 75mm × 53mm, about 580g;
Drive: 120.5mm × 25.5mm × 28.5mm, about 165g
Power supply: Built-in battery: lithium ion rechargeable battery;
Power adapter: input: 100V240VAC, 50 / 60Hz;
Output: 9V, 3A.
Configuration: One host, one standard sensor, one driver, one wire connection, one test block, one test version, one charger, manual, warranty card
Introduction
TIME®3222 high-performance roughness meter adopts dot-matrix color LCD touch screen, which is more convenient to control and display. The resolution reaches 320 × 480, which can display the entire roughness curve delicately. The split design of the host and the driver is used, the vertical amount is 400μm, and the range is increased, which is conducive to the measurement of the uneven surface. At full scale, the system resolution is 8 nanometers. The starting position C of the profile section can be customized to meet the requirements of quilting roughness measurement. The roughness curve measurement is more realistic, and the calculation of each parameter is more accurate. Digital modulation and demodulation, improve instrument measurement accuracy and anti-interference performance. The stylus position can be displayed, and the three calibration methods of average, peak and valley, and peak spacing can be adjusted; all parameters can be set with upper and lower limit alarms; one measurement can calculate and display the ISOR family parameters and the profile P family parameter. Can randomly store 10 sets of data. Built-in standard RS232 interface, USB interface. Standard RS232 serial interface and USB interface, connected to TA230 printer, can print parameters, contour graphics, support rate curve, amplitude distribution curve. Powerful PC software processing function (optional), can achieve more in-depth analysis of test results and test report processing.
The TIME® 3222 high-performance roughness tester has a compact design and is easy to carry. It is suitable for on-site measurement of roughness of various machined surfaces. The vertical range of the sensor is increased to 400μm, which has greater applicability to a workpiece with a large arc surface and other concave and convex undulations. Adopt the split design of the host and the driver, the compact driver is more flexible, and can be connected to the height ruler, various brackets, measurement platforms, etc. to achieve the surface measurement of many complex-shaped workpieces, even a certain arc surface, a certain inclination angle, various internal cavities Walls, tooth surfaces, grooves, etc. Through the selection of various sensors, it can solve a variety of small-aperture, small-diameter, curved surface, groove, deep groove and other field application problems.
