TIME® 3200 handheld roughness tester Introduction
The TIME® 3200 handheld roughness meter calculates the corresponding parameters according to the selected measurement conditions, clearly displays all measurement results and graphics on the LCD display, and can be output on the printer. It can also communicate with a PC to obtain richer test result analysis and test report processing through the PC software.
Product Usage:
The TIME® 3200 handheld roughness meter can measure up to 13 roughness parameters and can measure the surface roughness of various machined parts. It is small in size and easy to carry. It is suitable for on-site measurement. With the combination of multiple optional sensors, it can also achieve the measurement of complex surface roughness such as curved surfaces, small holes, grooves and deep grooves. Features
Mechatronic design, small size, easy to carry, suitable for on-site measurement;
Multi-parameter measurement can measure the surface roughness of various machined parts;
High-precision inductive sensor;
Comply with ISO and GB standards, compatible with DIN, ANSI, JIS standards.
LCD liquid crystal display, display measurement parameters and graphics;
Sensor pin position indication;
With indication calibration function;
High quality lithium ion rechargeable battery;
Standard RS232 interface, can communicate with PC;
Can be connected to a dedicated printer for on-site printing. Technical Parameters
Model: TIME®3200
Measurement parameters: Ra, Rz, Ry, Rq, Rt, Rp, Rv, Rmax, R3z, RSk, RS, RSm, Rmr
Measuring range: Ra: 0.025 ～ 12.5μm
Display range: Ra, Rq: 0.005 ～ 16μm, Rz, Ry, Rt, Rp, Rv, Rmax, R3z: 0.02 ～ 160μm, RS, RSm: 1mm, Rmr: 0-100% (% Rt), Rsk: 0 ～ 100%
Range: ± 20μm, ± 40μm, ± 80μm
Maximum display resolution: 0.001μm
Filtering method: RC, PC-RC, GAUSS, D-P
Sampling length: 0.25mm, 0.8mm, 2.5mm, automatic
Evaluation length: 1L ～ 5L (optional, L is the sampling length)
Measuring stroke length: 3L ～ 7L (optional, L is the sampling length)
Maximum driving stroke length: 17.5mm / 0.71inch
Minimum driving stroke length: 1.3mm / 0.052inch
Indication error: ≤ ± 10%
Indication variability: ≤6%
Tip angle: 90 °
Display mode: 128 × 64 dot matrix LCD (with backlight)
Working environment: Temperature: 0ºC ～ 40ºC, relative humidity: <90%
Weight: 440g
Dimensions: 140 × 52 × 48mm
Configuration: One host TIMES100, one test block, one test version, bracket, sensor sheath, charger, instruction manual, warranty card
Introduction
The TIME® 3200 handheld roughness meter calculates the corresponding parameters according to the selected measurement conditions, clearly displays all measurement results and graphics on the LCD display, and can be output on the printer. It can also communicate with a PC to obtain richer test result analysis and test report processing through the PC software.
Product Usage:
The TIME® 3200 handheld roughness meter can measure up to 13 roughness parameters and can measure the surface roughness of various machined parts. It is small in size and easy to carry. It is suitable for on-site measurement. With the combination of multiple optional sensors, it can also achieve the measurement of complex surface roughness such as curved surfaces, small holes, grooves and deep grooves.
