Introduction: TH-9001 carbon black content tester for polyethylene, polypropylene, polybutylene plastic, cable and cable insulation and sheathing materials, determination of carbon black content. Meet the national standard GBT 3515-2005, GBT 13021-1991, GB / T2951.41-2008, IEC60811-4-1: 2004. A certain amount of sample was pyrolyzed at high temperature in a stream of nitrogen, and the carbon black content was obtained by analyzing the weight of the pyrolyzed sample. Features: 1, the original dual temperature probe temperature measurement technology, temperature measurement more accurate, temperature control more stable. 2,220mm long heating zone, can do three samples at the same time. 3, 7-inch industrial grade microcomputer widescreen touch structure, display rich information, including setting temperature, sample temperature, oxygen flow, nitrogen flow, a variety of switch states. 4, equipped with advanced digital gas flowmeter, two-way gas automatically and quickly switch, stable time is short. 5, Optimized design of the heating furnace, stable performance, reliable quality. 6, automatic memory function, users just a key to start. 7, the program automatically ventilation, heating, constant temperature timing, beep alarm after the end of the process, without personnel custody. 8, can be set up to 20 sections of the temperature program, heating, constant temperature, cooling and other arbitrary settings. 9, the program can be set to automatic mode and manual mode, the operation is flexible and convenient. 10, cooling can be pulled out of the quartz tube, so that the test sample quickly cooling. 11, optional rapid cooling device. 12, the instrument can communicate via USB and computer, remote monitoring (optional). Technical Parameters: Temperature range: room temperature ~ 1100 ℃ Heating rate: 0.1 ~ 40 ℃ / min Temperature resolution: 0.01 ℃ Temperature fluctuation: ± 0.2 ℃ Temperature control methods: heating, constant temperature, cooling, circulation (full program automatic control) Atmosphere control: digital gas flow meter, the instrument automatically switches Gas flow: 0 ~ 300mL / min or 0 ~ 2000mL / min Gas pressure: 0.2MPa Display: 24bit color, 7 inch LCD touch screen display Quartz tube: Length 440mm, inner diameter 32mm Heating zone: length 220mm Quartz boat: Length 50mm or 75mm
Introduction: TH-9001 carbon black content tester for polyethylene, polypropylene, polybutylene plastic, cable and cable insulation and sheathing materials, determination of carbon black content. Meet the national standard GBT 3515-2005, GBT 13021-1991, GB / T2951.41-2008, IEC60811-4-1: 2004. A certain amount of sample was pyrolyzed at high temperature in a stream of nitrogen, and the carbon black content was obtained by analyzing the weight of the pyrolyzed sample.
