Introduction: TH-9001 carbon black content tester for polyethylene, polypropylene, polybutylene plastic, cable and cable insulation and sheathing materials, determination of carbon black content. Meet the national standard GBT 3515-2005, GBT 13021-1991, GB / T2951.41-2008, IEC60811-4-1: 2004. A certain amount of sample was pyrolyzed at high temperature in a stream of nitrogen, and the carbon black content was obtained by analyzing the weight of the pyrolyzed sample. Features: 1,220mm long heating zone, can do three samples at the same time. 2,7-inch industrial-grade microcomputer widescreen touch structure, display rich information, including setting temperature, sample temperature, oxygen flow, nitrogen flow, a variety of switch status. 3, advanced digital gas flowmeter configuration, two-way automatic rapid gas switching, short stabilization time. 4, optimized design of the heating furnace, stable performance, reliable quality. 5, automatic memory function, the user just a key to start. 6, the program automatically ventilation, heating, constant temperature timing, beep alarm after the end of the process, without personnel custody. 7, can set up up to 20 sections of temperature program, heating, constant temperature, cooling and other arbitrary settings. 8, the program can be set to automatic mode and manual mode, the operation is flexible and convenient. 9, cooling can be pulled out of the quartz tube, so that the test sample quickly cooling. 10, optional rapid cooling device. 11, the instrument can communicate via USB and computer, remote monitoring (optional). Technical Parameters: 1, temperature range: room temperature ~ 1100 ℃ 2, heating rate: 0.1 ~ 40 ℃ / min 3, temperature resolution: 0.01 ℃ 4, temperature fluctuations: ± 0.2 ℃ 5, temperature control mode: heating, thermostat, cooling, circulation (full program automatic control) 6, atmosphere control: digital gas flow meter, the instrument automatically switches 7, gas flow: 0 ~ 300mL / min or 0 ~ 2000mL / min 8, gas pressure: 0.2MPa 9, Display: 24bit color, 7-inch LCD touch screen display 10, quartz tube: length 440mm, diameter 32mm 11, heating zone: length 220mm 12, quartz boat: the length of 50mm or 75mm
Introduction: TH-9001 carbon black content tester for polyethylene, polypropylene, polybutylene plastic, cable and cable insulation and sheathing materials, determination of carbon black content. Meet the national standard GBT 3515-2005, GBT 13021-1991, GB / T2951.41-2008, IEC60811-4-1: 2004. A certain amount of sample was pyrolyzed at high temperature in a stream of nitrogen, and the carbon black content was obtained by analyzing the weight of the pyrolyzed sample.
