Brief introduction: Thermogravimetric analysis (TG, TGA) is in the process of heating and constant temperature or temperature, observe the quality of the samples, along with the change of temperature or time objective is to study the thermal stability of materials and components. Widely used in plastics, rubber, coatings, pharmaceuticals, catalysts, inorganic materials, metal materials and composite materials in various fields of research and development, process optimization and quality monitoring Survey and research materials of the following features: Thermal stability, decomposition, adsorption and desorption, oxidation and reduction, a quantitative analysis of ingredients, additives and fillers, moisture and volatile matter and reaction kinetics. Technical parameters: Scope: 1. The temperature at room temperature to 1350 ℃ 2. The temperature resolution: 0.1 ℃ 3. The temperature fluctuation: plus or minus 0.1 ℃ 4. The heating rate: 1 ~ 80 ℃ / min 5. Temperature control mode: temperature, constant temperature, cooling 6. The cooling time: 15 min (1000 ℃ 100 ℃)... 7. The balance measurement range: 1 ~ 2 g, mg can be extended to 5 g 8. Resolution: 10 mu g 9. The constant temperature time: 0 ~ 300 min set arbitrary 10. Display mode: domestic liquid crystal display in English 11. The atmosphere: inert, oxidizing, reducing and static and dynamic 12. The atmosphere device: built-in gas flowmeter, contains two gas switch and flow control 13. Software: intelligent software can automatically record the TG curve for data processing, print test reports 14. The data interface: RSS - 232 interface, specialized software (software not free upgrade) on a regular basis 15. Power supply: AC220V 50 hz
Brief introduction: Thermogravimetric analysis (TG, TGA) is in the process of heating and constant temperature or temperature, observe the quality of the samples, along with the change of temperature or time objective is to study the thermal stability of materials and components. Widely used in plastics, rubber, coatings, pharmaceuticals, catalysts, inorganic materials, metal materials and composite materials in various fields of research and development, process optimization and quality monitoring
