TDA-2I aerosol photometer Introduction: 2i is currently the most advanced, innovative, and user-friendly portable aerosol digital photometer. It is a lightweight and ideal integrity testing instrument for on-site high-efficiency filter systems. The new 2i scanning probe can provide all operational functions of the host. Innovative user interface - The 2i host features a 4.3-inch LCD display and a theme driven interface that is easy to use. The measurement of aerosols and the sampling speed of the vacuum pump are clearly displayed on the LCD, which is easy to see; For the selected alarm type, alarm point, and aerosol solution, there are indications on the menu below the LCD; At the top of the LCD, information such as connection status, alarm type, report type, and noise reduction is displayed. IProbe scanning probe - The scanning head iProbe serves as an extension of a host through circuit connections, and the control status and selection icons of all hosts are displayed on the iProbe. Even editing the test position through buttons can be achieved on the iPhone. Technical parameters: Size: 25.7 cm x 33cm x 15.2 cm Weight: 7.5 kg (host)+1.1 kg (scanning probe and accessories)=8.6 kg; Shell: The shell of the instrument is sturdy, made of die cast aluminum. When internal parts are repaired and recalibrated, it is easy to assemble. Power supply: 100-250V AC, 50/60HZ. Automatically adjust to all current standard voltages in the world. When placing an order, please specify the power supply cable; Data range: from 0.0001% to 100.0%, automatic LCD display; Auto zeroing: Automatically establish zero position. In "clear" mode, when the sample airflow passes through the internal ultra pure filter, the zero position is established by pressing the 0% key. It is also possible to automatically set the downstream reading of the filter to zero and press the 0% key to establish the zero position; Alarm: When the set point is exceeded, an audible alarm starts. The visible alarm display flashes on the panel and scanning head; Flow control: Confirm with PWM (Pulse Amplitude Control Module) that the sampling flow rate is 28.3+/-10% in any application Can set aerosol solution: PAO－4，DOP，Ondina,PEG,Krydol,Corn Oil,Mineral Oil,Paraffin Dynamic range: up to 600ug/L; Sensitivity: 1% of the reading within the range of greater than or equal to 0.01% to 100%; Repeatability: 0.5% of readings within the range of greater than or equal to 0.01% to 100%; Light source: Long life, stable, solid-state light scattering cavity light source. The photometer operates at low energy, low heat, and low deviation light. Lifespan ranges from 50000 to 100000 hours; Output: USB connection or external printer (optional);
Introduction: 2i is currently the most advanced, innovative, and user-friendly portable aerosol digital photometer. It is a lightweight and ideal integrity testing instrument for on-site high-efficiency filter systems. The new 2i scanning probe can provide all operational functions of the host. Innovative user interface - The 2i host features a 4.3-inch LCD display and a theme driven interface that is easy to use. The measurement of aerosols and the sampling speed of the vacuum pump are clearly displayed on the LCD, which is easy to see; For the selected alarm type, alarm point, and aerosol solution, there are indications on the menu below the LCD; At the top of the LCD, information such as connection status, alarm type, report type, and noise reduction is displayed. IProbe scanning probe - The scanning head iProbe serves as an extension of a host through circuit connections, and the control status and selection icons of all hosts are displayed on the iProbe. Even editing the test position through buttons can be achieved on the iPhone.
