Introduction: TBP-1002SF pipe and pump head are made of PTFE (polytetrafluoroethylene) material. Compared with 316L stainless steel/PEEK/metal titanium material, PTFE material is more inert, which can meet the requirements of precise constant current and constant pressure conveying strong corrosion solvent in experiments. Characteristics 1. Two-seat imported ruby check valve design: high flow accuracy, long service life; 2. European standard spare parts: easy to replace; 3. Communicate with the computer through the RS232 interface, which can be directly controlled by the computer; 4. Easy to repair the design of the pump casing: the pump can be repaired without stopping the machine; 5. Built-in overvoltage protection and flow correction system; 6. Seal design: internal structure modular seal, anti-corrosion and dustproof; 7. The well-designed exhaust device effectively removes air bubbles from the transport liquid; 8. Flow and pressure settings can be remembered; 9. Anti-blocking rough flow path design: 2mm, 3mm, 6mm pipeline optional. Inch 1/8 and other pipeline customization, 10. Avoid blockage caused by the fine flow path of the chromatographic pump. Technical Parameters: Flow path materials: imported gem ball valve, ceramic plunger rod; pump head and piping material: PTFE Pressure range: 0 - 2.0MPa Flow range: 0.1-10.0ml/min Pressure pulsation: ≤ 0.01MPa Pressure accuracy: ≤ 0.10MPa Flow setting error: ≤ 0.5% Flow repeatability error: ≤ 0.5% Working voltage: 220V±10%, 50/60Hz Power: 75W Weight: 17Kg Dimensions: 270 × 400 × 190 mm
Introduction: TBP-1002SF pipe and pump head are made of PTFE (polytetrafluoroethylene) material. Compared with 316L stainless steel/PEEK/metal titanium material, PTFE material is more inert, which can meet the requirements of precise constant current and constant pressure conveying strong corrosion solvent in experiments.
