Introduction:
The microbial limit tester is a microbial limit test equipment designed and manufactured according to the relevant regulations of the Pharmacopoeia. This product uses a high-performance diaphragm pump to directly discharge liquid without a suction filter bottle. It can be formed through a filter cup or limit incubator matched with different pump heads Complete membrane filtration unit. When testing, the test solution is filtered through a membrane, and the microorganisms in the test solution are trapped on the filter membrane, and then cultivated to form colonies visible to the naked eye and counted to detect the bacterial content in the test product. These products are tested for microbial limits in purified water and water for injection. Technical parameters: 1. Applicable consumables: S60 disposable microbial limit incubator 2. Filter cup volume: 100ml 3. Power supply: AC 220V/50Hz 4. Power: 40W 5. Pumping speed: 30L/min 6. Vacuum degree: 45kPa 7. Noise: 45dB(A) 8. Weight: 9kg 9. Overall dimension (length * width * height) : 40.5 23 12cm 10. Shell and pump head material: SUS304L stainless steel
Introduction:
The microbial limit tester is a microbial limit test equipment designed and manufactured according to the relevant regulations of the Pharmacopoeia. This product uses a high-performance diaphragm pump to directly discharge liquid without a suction filter bottle. It can be formed through a filter cup or limit incubator matched with different pump heads Complete membrane filtration unit. When testing, the test solution is filtered through a membrane, and the microorganisms in the test solution are trapped on the filter membrane, and then cultivated to form colonies visible to the naked eye and counted to detect the bacterial content in the test product. These products are tested for microbial limits in purified water and water for injection.