SZ2088-K05 series pressure switch/controller Introduction: Pressure controller is a digital pressure measurement and control product that integrates pressure measurement, display, output, and control. This product is a fully electronic structure, with an isolation membrane filled hydraulic resistance pressure sensor at the front end. It is converted from high-precision A/D, processed by a microprocessor, displayed on site, and outputs one analog signal and four switch signals. This digital pressure controller is flexible to use, easy to operate, and easy to debug. Applied in industries such as hydropower, tap water, petroleum, chemical, mechanical, hydraulic, etc., it can measure, display and control the pressure of fluid media on site. characteristic: 1. Installation of 100 standard instruments 2. 4-digit LED digital display 3. Four way control point relay output 4. On site setting of control points 5. 4-20mA standard signal output 6. Power supply options include 24VDC and 220VAC Technical parameters: Range:- 0.1~100MPa Accuracy level: 0.5% Overload capacity: 200% Pressure type: gauge pressure/absolute pressure/negative pressure/differential pressure Stability: ≤ 0.1%/year Power supply voltage: 24V/220V Display mode: 0.56 "digital tube Display range:- 1999~9999 Environmental temperature:- 20℃~70℃ Relative humidity: ≤ 80% Installation thread: optional Material: Stainless steel/BP explosion-proof
Introduction: Pressure controller is a digital pressure measurement and control product that integrates pressure measurement, display, output, and control. This product is a fully electronic structure, with an isolation membrane filled hydraulic resistance pressure sensor at the front end. It is converted from high-precision A/D, processed by a microprocessor, displayed on site, and outputs one analog signal and four switch signals. This digital pressure controller is flexible to use, easy to operate, and easy to debug. Applied in industries such as hydropower, tap water, petroleum, chemical, mechanical, hydraulic, etc., it can measure, display and control the pressure of fluid media on site.
