SYD-XW6 fiber bulk density tester Introduction: The SYD-XW6 fiber bulk density tester is designed and manufactured in accordance with the relevant requirements of Appendix N "Bulk density test for granular wood fibers" in the transportation industry standard JT/T 533-2020 "Fibers for asphalt pavement". This instrument adopts the test method described in the standard to obtain the bulk density value of granular wood fibers through calculation. Features: 1. Stainless steel funnel and stainless steel metal cup adopt special processing technology to ensure smooth inner surface and meet test requirements. 2. The test funnel discharge valve is designed reasonably, with reliable discharge and durability. 3. The instrument base is stable, the bracket is firm, and there is no shaking during the test. The test results are reliable. 4. The base is equipped with horizontal bubbles, and the four horizontal adjustment feet can be adjusted to make the base horizontal and the column vertical, thereby ensuring the accuracy of the test results. Technical parameters: Funnel: height 115mm, upper inner diameter 55mm ± 1mm, lower inner diameter 35mm ± 1mm Metal cup: height 80mm ± 1mm, inner diameter 40mm ± 1mm Volume 100mL Distance between the lower edge of the funnel and the upper surface of the metal cup: 40mm
Introduction: The SYD-XW6 fiber bulk density tester is designed and manufactured in accordance with the relevant requirements of Appendix N "Bulk density test for granular wood fibers" in the transportation industry standard JT/T 533-2020 "Fibers for asphalt pavement". This instrument adopts the test method described in the standard to obtain the bulk density value of granular wood fibers through calculation.
