Introduction: The SYD-XW3 fiber abrasion tester is designed and manufactured in accordance with the relevant requirements of Appendix L "Sieving and Wear Test Methods for Granular Wood Fibers" in the transportation industry standard JT/T 533-2020 "Fibers for Asphalt Pavements". After the fiber abrasion tester places the granular wood fibers in the grinding system for a predetermined grinding time, the vibrating screen system starts working to screen the ground fibers and complete the quality analysis of the granular wood fibers after grinding and screening. characteristic 1. Composed of grinding system, vibrating screen system, control system, and motor, the whole machine is designed in an integrated manner. 2. Adopting color touch screen control, real-time display of experimental information, human-machine interaction, and simple operation. 3. Equipped with safety protection devices for feed and discharge ports, ensuring the safety of operators. 4. The working motor is equipped with a braking device to enhance instrument safety protection. 5. The vibrating screen system operates stably without any noise. 6. The special feeding port design ensures that the wear chamber is circular as a whole, allowing for more thorough grinding. Technical parameters: 1. Grinding system Grinding wheel diameter: 280mm Grinding wheel thickness: 4mm Grinding tooth length: 50mm Grinding tooth width: 15mm Grinding tooth angle: 30 ° Distance from grinding chamber sidewall: 48mm Distance from grinding chamber diameter direction: 10mm Grinding wheel speed: 500r/min 2. Vibration screen system Sieve size: 2.8mm and 4mm Vibration frequency: 50Hz Vibration amplitude: 2mm 3. Working power supply: AC (380 ± 10%) V/50Hz 4. Power consumption of the entire machine: 1000W 5. Test environment: Temperature (5-30) ℃, relative humidity ≤ 80%
Introduction: The SYD-XW3 fiber abrasion tester is designed and manufactured in accordance with the relevant requirements of Appendix L "Sieving and Wear Test Methods for Granular Wood Fibers" in the transportation industry standard JT/T 533-2020 "Fibers for Asphalt Pavements". After the fiber abrasion tester places the granular wood fibers in the grinding system for a predetermined grinding time, the vibrating screen system starts working to screen the ground fibers and complete the quality analysis of the granular wood fibers after grinding and screening.
