Introduction: The instrument according to the national standard GB / T267 "flash point and ignition point of petroleum products (open cup method)" and the national petrochemical industry standard SH / T0318 "open flash point measuring apparatus technical conditions" prescribed by the requirements. Determination of oil and dark oil products, flash point and ignition. Technical Parameters: 1, working power: AC 220V ± 10%, 50Hz. 2, the outer crucible ⑴ material: 0.3 high-quality carbon structural steel, the surface is black; ⑵ on the mouth diameter: Φ100 ± 5mm; ⑶ height: 50 ± 5mm; ⑷ bottom diameter: Φ56 ± 2mm. 3, the crucible ⑴ Materials: 0.3 high-quality carbon structural steel, the surface black;
⑵ mouth diameter: Φ64 ± 1 mm;
⑶ high: 47 ± 1 mm;
⑷ bottom diameter: 38 ± 1 mm;
⑸ tick: in the upper edge of the 12 mm and 18 mm at each engraved a. 4, gas conduit: Spout diameter Φ0.8 ~ Φ1 mm, the inner surface of the hole smooth to adjust the flame 3 to 4 mm. 5, Heater: electric furnace heating, heating power 1000W adjustable. 6, thermometer: 0 ~ 360 ℃, indexing 1 ℃, technical conditions in line with the test of liquid petroleum products, the technical conditions of liquid thermometer GB / T514 requirements. 8, the ambient temperature: ≤ 35 ℃. 9, relative humidity: ≤ 85%. 10, the whole power consumption: not more than 1100W.
Introduction: The instrument according to the national standard GB / T267 "flash point and ignition point of petroleum products (open cup method)" and the national petrochemical industry standard SH / T0318 "open flash point measuring apparatus technical conditions" prescribed by the requirements. Determination of oil and dark oil products, flash point and ignition.
