SYD-0754 Cohesion Tester Introduction: This instrument is designed and manufactured according to the requirements of T 0754-2011 Test on Cohesion of Slurry Mixture in JTG E20-2011 Test Procedures for Asphalt and Asphalt Mixture of Highway Engineering, the industrial standard of the People's Republic of China. It is applicable to measuring the degree of cohesion between lotion and aggregate, and determining the opening time of traffic after the construction of slurry seal coat. It is the key equipment in the mix proportion test of emulsified asphalt slurry seal coat mixture. Features: 1. This instrument is a desktop structure with a novel design, reasonable structure, and convenient use. 2. The structural design of this instrument and the specifications and dimensions of the testing instruments all comply with the requirements of T0754 standard. 3. This tester is convenient to carry and can be used for indoor testing as well as construction sites. It is widely applicable to various construction units and research institutes to analyze and determine the degree of adhesion between emulsified asphalt and aggregates. Technical parameters: Rubber pad diameter: φ 28.6mm; Rubber pad thickness: 6.4mm; Rubber pad hardness: HRC60; Maximum pressure: 1Mpa; Circular trial mold: φ 60mm x 6mm; φ 60mm x 10mm; Torque wrench: (0-5) N • m. External dimensions: 535mm x 205mm x 420mm (length x width x height). Working power supply: AC (220 ± 10%) V; 50Hz.
Introduction: This instrument is designed and manufactured according to the requirements of T 0754-2011 Test on Cohesion of Slurry Mixture in JTG E20-2011 Test Procedures for Asphalt and Asphalt Mixture of Highway Engineering, the industrial standard of the People's Republic of China. It is applicable to measuring the degree of cohesion between lotion and aggregate, and determining the opening time of traffic after the construction of slurry seal coat. It is the key equipment in the mix proportion test of emulsified asphalt slurry seal coat mixture.
