Brief introduction This instrument is suitable for the determination of have the same (base oil and additives) of new and used in the oxidation stability of turbine oil, can also be used to assess containing 2, 6 - BHT new mineral insulating oil, as a rapid assessment method of oxidation stability.
Features 1. The instrument can be used to the new oil, oil, steam turbine oil, lubricating oil, insulating oil, and determination of automotive gasoline engine oil oxidation stability test. 2. Use a metal bath, dispensing with liquid medium, medium oil reduce trial sends out a bad smell, put an end to long for experiment of possible danger. 3. Single projectile independent design, each test one sample, test process has the ability of fast turnaround. 4. Desktop design of small size, simple ventilation, no place in the fume hood, exhaust gas and odor by plastic pipe can be simple. 5. Design with more than one online test software, can simultaneously or respectively control up to 4 the operation of the instrument. 6. Configuration has the sample temperature sensor components, can real-time measurement in the process of testing the temperature of the sample. 7. Operating software in the U disk, an ordinary computer can use, without the other procurement or modified equipment.
Technical parameter 1 Angle of the oxygen bomb and horizontal plane: 30 °. 2. Heating tube power: 2500 w. 3. Work way: monomer metal bath, every time a sample test. Range: 4, pressure sensor (0 ~ 1.6 MPa, precision: plus or minus 2 ‰. 5. Test bath temperature control points: 140.0 ℃, 150.0 ℃. 6. Test bath temperature control precision: plus or minus 0.1 ℃;rotating speed of rotation mechanism: (100 + 5) r/min. 7. Working power supply: AC (220 + / - 5%) V / 50 hz. 8. Machine power consumption: no greater than 2600 w. 9. Environment temperature: - 10 ℃ o ~ 40 ℃. 10. Relative temperature: <= 85%. 11. Appearance size: 440 mm * 200 mm * 200 mm (length * width * height).
Brief introduction This instrument is suitable for the determination of have the same (base oil and additives) of new and used in the oxidation stability of turbine oil, can also be used to assess containing 2, 6 - BHT new mineral insulating oil, as a rapid assessment method of oxidation stability.
