Introduction: The SX-L3100T laser dust particle counter (100L/min) is used to measure the size and number of dust particles in a unit of air in a clean environment. It can directly detect the clean environment where the cleanliness level is A and B. The SX-L3100T laser dust particle counter adopts a semiconductor laser light source and a large touch screen display. It provides a simple operation mode, fast sampling, light and portable, and effectively saves the operator's time. The lightweight, streamlined stainless steel housing and the ergonomic handle allow users to easily lift it with one hand and place it in any suitable measuring place. In addition, you can download and store data through computer-specific software. Products are widely used in clean environment testing in medicine, optics, chemistry, food, cosmetics, electronic health, biological products, aerospace and other industries. Features: 1. 100L/min sampling volume 2. AC and DC dual purpose 3. Touch screen control operation 4. Six-channel particle size display on the same screen, displaying particle concentration (particles/m3) 5. Automatic UCL calculation. Technical Parameters: Sampling flow: 100L/min (3.53cfm) Particle size channel: 0.3, 0.5, 1, 3, 5, 10μm Self-cleaning time: ≤10min Particle size distribution error: 0.5μm, particle size distribution error ±30% Indication error of particle size concentration: After the particle counter is in the normal working state, the error of the particle concentration indication of the 0.5 micron particle size block should not exceed ±10%. Repeatability relative deviation: Under the same measurement conditions, the particle concentration continuous measurement value repeatability ±10% Maximum sampling concentration: 35000/L Cleanliness grade judgment standard: ISO14644-1, GMP dynamic, GMP static Laser light source: laser diode Imported air pump: continuous work stable, energy saving and environmental protection Data communication interface: USB Temperature and humidity: optional Power supply: AC 220V 50Hz Built-in lithium battery: DC 14.8V 36Ah Charging adapter: input 100V~240V 2.5A, output 16.8V 5A Battery charging time: 8 hours Dimensions/weight: length 291 × width 265 × height 280 (mm3)/9.15kg Material: SUS304 stainless steel Use environment: 0～40℃, 10-90%RH Storage environment: Use environment: temperature 0~40℃ relative humidity 10~70%PH Storage environment: temperature -30~45℃ relative humidity 0~90%PH Working time: 4 hours continuous test time when fully charged
Introduction: The SX-L3100T laser dust particle counter (100L/min) is used to measure the size and number of dust particles in a unit of air in a clean environment. It can directly detect the clean environment where the cleanliness level is A and B. The SX-L3100T laser dust particle counter adopts a semiconductor laser light source and a large touch screen display. It provides a simple operation mode, fast sampling, light and portable, and effectively saves the operator's time. The lightweight, streamlined stainless steel housing and the ergonomic handle allow users to easily lift it with one hand and place it in any suitable measuring place. In addition, you can download and store data through computer-specific software. Products are widely used in clean environment testing in medicine, optics, chemistry, food, cosmetics, electronic health, biological products, aerospace and other industries.
