Introduction: The SWIFT mechanical wind sensor uses engineering plastics and imported bearings, and has strong wind and sand resistance, corrosion resistance, weather resistance and high accuracy. Application: wind power generation; meteorology; photovoltaic, agriculture, etc. Features: 1. The use of engineering plastics has strong sand and corrosion resistance, no embrittlement at low temperature, no deformation or softening at high temperature; 2. The use of imported bearings, non-contact (non-friction) coding circuit and conversion circuit ensures that the sensor has good sensitivity, accuracy and linearity, and improves the life of the sensor; 3. The unique wind cup design and wind cup processing technology effectively improve the rigidity and wind resistance of the sensor, and the wind resistance strength can reach 70m/s; 4. Tested by a third-party professional organization, the accuracy, stability, anti-interference, etc. are strictly guaranteed; 5. With temperature control heating function, it is suitable for severe cold and freezing areas. Technical parameter wind speed Model: SA50C Output mode: 4~20mA Start wind speed: 0.5m/s Measuring range: 0~50m/s Maximum allowable error: ±0.5m/s or 0.03Vm/s Resolution: 0.1m/s Working voltage: 24VDC Wind strength: 70m/s Heating power: 20W Protection class: IP65 Working environment temperature: -40~+70℃ Working environment humidity: 0~95%RH wind direction Model: SV50C Output mode: 4~20mA Starting wind speed: ≤1m/s Measuring range: 0~360° Maximum allowable error: ±5° Working voltage: 24VDC Wind strength: 70m/s Heating power: 20W Protection class: IP65 Working environment temperature: -40~+70℃ Working environment humidity: 0~95%RH
Introduction: The SWIFT mechanical wind sensor uses engineering plastics and imported bearings, and has strong wind and sand resistance, corrosion resistance, weather resistance and high accuracy. Application: wind power generation; meteorology; photovoltaic, agriculture, etc.
