Brief introduction: SW7A series for Soundwel through coating type ultrasonic thickness meter has high precision, suitable for all kinds of materials through the coating and high precision measurement requirements, can be applied to steel, cast iron, aluminum, copper, zinc, quartz, glass, polyethylene, PVC, grey cast iron, nodular cast iron and other material thickness measurement object to be tested. Only need to place the probe on the contact surface, on one side of the object to be tested was fast, accurate, can measure the thickness of the object to be tested. Features: 1. No clear coating on the surface of the object to be tested and non-metallic attachments to measure thickness; 2. Automatic recognition probe and calibration function; 3. Material velocity range from 509 to 18699 meters per second; 4. The large capacity data storage can store up to 2000 data; 5. The PC USB interface for data transmission and management; 6. Dot matrix LCD screen, the screen backlight function adjust freely. 7. Through the coating range extended to more than 50 mm Technical indicators: The thickness measuring range: 0.65 to 500 mm (steel) 0.3 to 200 mm (glass) 3 ~ 50 mm (cast iron) 4-80 mm (high temperature) Through the coating measurement range: 3 mm to 50 mm Material velocity: 509 ~ 18699 m/s Pipe measurement limit: (depending on the probe configuration) Φ 15 mm x 1.0 mm (probe: 5 MHZ, Φ 10 mm) Φ 10 mm x 1.2 mm (probe: 7.5 MHz, Φ 6 mm) Display precision: 0.01 mm / 0.001 inch Accuracy: 10 mm below 0.05 mm, more than 10 mm H 0.5% Receive bandwidth: 1 MHZ ~ 10 MHZ (3 db) Measurement frequency: 2 ~ 20 times/SEC (set) Power source: 3 VDC (two AA alkaline batteries) Screen: 128 * 64 dot matrix LCD Working hours: 280 hours (automatic mode) 100 hours (backlit open) Applicable temperature: - 10 ℃ to 50 ℃ (room temperature measurement environment) - 10 ℃ ~ 300 ℃ high temperature measurement environment) Working humidity: 20% ~ 90% RH Size: 136 mm x 72 mm (W) (L) x 20 mm (H) Weight: 176 g (including battery) With the thickness of the block: 3 mm
Brief introduction: SW7A series for Soundwel through coating type ultrasonic thickness meter has high precision, suitable for all kinds of materials through the coating and high precision measurement requirements, can be applied to steel, cast iron, aluminum, copper, zinc, quartz, glass, polyethylene, PVC, grey cast iron, nodular cast iron and other material thickness measurement object to be tested.
