SW50H Ultrasonic Wind Sensor Introduction: SWIFT ultrasonic wind sensor is a measuring instrument that uses the phase difference of ultrasonic wave propagation time in the air to measure wind speed and direction. Made of 316 stainless steel, it has high corrosion resistance and wind sand resistance, and the sealing protection level can reach IP67; The overall heating and automatic temperature control of the system are particularly suitable for harsh working conditions such as severe cold, high altitude, high humidity, strong wind and sand. More suitable for offshore wind turbines. advantage: 1. Compatible with THIES, FT, Lambrecht, Kriwan, NRG, LUFFT, etc; 2. Adopt ultrasonic working principle, with solid structure, no rotating parts, and maintenance free; 3. High measurement accuracy; 4. Made of 316 stainless steel, corrosion resistant; 5. Integrated wind speed and direction sensors; 6. Programmed overall heating, suitable for severe cold and frozen areas; 7. Adopt acoustic wave phase compensation technology to protect and compensate for environmental factors such as rainstorm, altitude, temperature, lightning, wind and sand; 8. Digital filtering technology with strong electromagnetic interference resistance; 9. The structure is solid, simple, and resistant to wind and sand. Technical parameters: Size: 109.8mm * 120.8mm Weight: 1.5kg Working temperature: - 40~+85 ℃ Power consumption: 24VDC, max 170VA (heating)/24VDC, max0.2VA (working) Working voltage: 24VDC ± 25% Electrical connection: 8pin aviation plug Housing material: 316 stainless steel Protection grade: IP67 Corrosion protection grade: C5-M Surge level: Level 4 Baud rate 1200-57600 Analog output signals: 0~20mA, 4~20mA, 0~10V, 2~10V, 0~5V Pulse: 2~2000HZ, Gray code: (2 bits/4 bits) Digital output signal: RS485 half/full duplex Wind speed range: 0~50m/s (0~75m/s optional) Accuracy: 0.2m/s (0-10m/s), ± 2% (>10m/s) Resolution: 0.1m/s Wind direction range: 0~360 ° Accuracy: ± 1 ° Resolution: 1 ° Temperature range: - 40~+85 ℃ Accuracy: ± 0.2 ℃ Resolution: 0.1 ℃
Introduction: SWIFT ultrasonic wind sensor is a measuring instrument that uses the phase difference of ultrasonic wave propagation time in the air to measure wind speed and direction. Made of 316 stainless steel, it has high corrosion resistance and wind sand resistance, and the sealing protection level can reach IP67; The overall heating and automatic temperature control of the system are particularly suitable for harsh working conditions such as severe cold, high altitude, high humidity, strong wind and sand. More suitable for offshore wind turbines.
