Introduction: This product uses the latest laser measurement technology, the maximum measurement range of 1700 meters (natural reflection target 500 meters), the accuracy of less than 2 cm, the maximum speed of 10 points / second; high precision photoelectric encoder for angle measurement, the accuracy of up to 2 seconds, The computer can only be used to scan the telescope, scan data directly stored in memory; professional three-dimensional modeling Survey mapping software, powerful, directly read the memory scan point data, generate DTM model ; Can be unified volume, area, surface area, volume difference and other spatial data information; instrument small size, weighs only 5.3 kg, easy to carry; installation fast, more efficient than the manual single point of measurement data collection, allowing you to keep abreast of The required information; Technical Parameters: Scanning distance: 500 meters Scanning accuracy: 2 cm Distance resolution: 1 mm Scanning speed: 3 dots per second Power supply: 12VDC Weight: 4.8 kg Size: 170X160X330cm Operating temperature range: -20 degrees to +45 degrees Wavelength: 905 nm (Infrared) Safety class: Class I, 7 mm (FDA CFR21) class IM (IEC 60825-1: 2001) Beam divergence of 3mrad (328 feet of target distance or 30 cm = 1.0 feet of beam diameter of 100 meters) Reflect / non refllective target: (+/-) 0.4 "/0.8" (1 cm / 2 cm) Measuring dead zone: 46 cm Reflection / non-reflective target High reflective surface Measuring distance: 1700 m / natural target Surface measurement distance: 500 m
Introduction: This product uses the latest laser measurement technology, the maximum measurement range of 1700 meters (natural reflection target 500 meters), the accuracy of less than 2 cm, the maximum speed of 10 points / second; high precision photoelectric encoder for angle measurement, the accuracy of up to 2 seconds, The computer can only be used to scan the telescope, scan data directly stored in memory; professional three-dimensional modeling Survey mapping software, powerful, directly read the memory scan point data, generate DTM model ; Can be unified volume, area, surface area, volume difference and other spatial data information; instrument small size, weighs only 5.3 kg, easy to carry; installation fast, more efficient than the manual single point of measurement data collection, allowing you to keep abreast of The required information;
