Sales ST300 colorimetric infrared thermometer，Manufacturer

Position: Home > > Measurement instrument > Temperature measuring instrument > Infrared thermometer > ST300 colorimetric infrared thermometer

ST300 colorimetric infrared thermometer

Product ID：CLWDhwcw021

Price: Please inquire PDF Format

Supply Ability:20SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberST300

Brand NameSXRGZDHYB

Payment TermsT/T, paypal

Product overview:
ST300 series online colorimetric infrared thermometer USES colorimetric temperature principle to directly measure the real temperature of the target without the influence of material radiation rate, and has strong resistance to smoke, water vapor and dust. It has a variety of temperature measurement methods, with temperature display and signal output, suitable for both measurement and closed-loop control. Instrument temperature measurement is not affected by window glass (except colored glass). It's not limited by the distance coefficient. The instrument has good tightness, waterproof, dustproof, strong durability, flexible, accurate, strong anti-interference, small size of equipment, intelligence, speed and other characteristics. Suitable for use in industrial sites with harsh environmental conditions.
Advantages:
Dichromatic ratio technology is independent of absolute energy measurement and can be used to measure temperature with higher precision and repeatability.
Dichromatic ratio technology reduces or eliminates most environmental impacts, such as dirty lenses, dirty Windows, and so on.
Dual color ratio technology its principle determines that the measured temperature is the maximum value of the target temperature, which is closer to the actual value of the target temperature.
In case of unknown emittance, dichromatic ratio technology has absolute temperature measurement advantage.
Has a monochrome mode and can also be used as a monochrome thermometer.
Technical indicators:

	ST300-A	ST300-B	ST300-C
Temperature range	600℃～1400℃	700℃～1800℃	1000℃～3000℃
Spectral response	0.7μm～1.3μm
Optical resolution	150:1	300:1
Certainty of measurement	Read ±1% of the value
Repeatability precision	Read ±0.5% of the value
response time	≤100 ms
Aiming mode	Telescope visual sight
Falling gradient	0.800～1.200（Two-color mode）
Emissivity	0.10～1.00（Monochromatic mode）
Signal processing	Single and double color mode switching; peak holding; average value; relay alarm
Source	24VDC,±20%,250mA(Allow for 100mV peak ripple)
Power	Maximum 2W
Analog output	4-20mA
Digicom	RS485
Output relay	A normally open contact.,1A30VDC/0.5A125VAC Impedance： ≤50mΩ
Levels of protection	IP65
Ambient temperature	-20℃～60℃
Relative humidity	10 / 95% no dew
Outline dimension	Φ50*185 mm
Weight	600g

Product overview:
ST300 series online colorimetric infrared thermometer USES colorimetric temperature principle to directly measure the real temperature of the target without the influence of material radiation rate, and has strong resistance to smoke, water vapor and dust. It has a variety of temperature measurement methods, with temperature display and signal output, suitable for both measurement and closed-loop control. Instrument temperature measurement is not affected by window glass (except colored glass). It's not limited by the distance coefficient. The instrument has good tightness, waterproof, dustproof, strong durability, flexible, accurate, strong anti-interference, small size of equipment, intelligence, speed and other characteristics. Suitable for use in industrial sites with harsh environmental conditions.