ST-R200 cutting mill Introduction
The ST-R200 cutting mill is suitable for the pulverization and homogenization of soft, medium-hard, tough, elastic, fibrous and synthetic materials. Using the principle of cutting and shearing, the sample is gently and rapidly pulverized to prevent sample denaturation. The ST-R200 is not only extremely smashing, but also easy to clean and easy to clean. 1.5KW and 3KW motors are available, and the powerful 3kw drive has a wider range of applications. An optional cyclone is used in combination to handle small or light samples. Features
1.LCD touch screen operation mode, parameter setting is simple and fast
2.1.5KW and 3KW motors are optional, 3 kW drive, powerful cutting, and a wider range of applications
3.With movable bracket, can be placed on the test bench or landing, the bracket with pulley, easy to move
4.With brake device, safety door control - the instrument does not start when the door is opened, ensuring the safety of the operator
5.Rapid grinding and low heat generation, which can be used for crushing heat sensitive samples
6.The door can be opened, the rotary cutter and the bottom screen can be disassembled without tools, and the grinding chamber is easy to clean and prevent sample cross-contamination.
7.With reverse function to ensure the normal operation of the instrument
8.The size of the sample is controllable, and a variety of aperture bottom screens are available.
9.Wide range of accessories, different injection funnels, collection container, rotary knife and bottom screen Technical Parameters
Injection size: ≤95mm
Final fineness: 0.2-20mm
Processing capacity: 0.2-85kg/hr
Speed: 100-3000rpm
Receiving tank volume: 5 liters (standard) 0.5-30L optional
Optional screen aperture: ladder screen: 0.2/0.25/0.50/0.75 /1.00 /1.50mm
Square hole screen: 2.00/ 4.00 /6.00/ 8.00/ 10.00/ 20.00 mm
Power supply: 3KW 380V 50/60 HZ
1.5KW 220V 50/60 HZ
Introduction
The ST-R200 cutting mill is suitable for the pulverization and homogenization of soft, medium-hard, tough, elastic, fibrous and synthetic materials. Using the principle of cutting and shearing, the sample is gently and rapidly pulverized to prevent sample denaturation. The ST-R200 is not only extremely smashing, but also easy to clean and easy to clean. 1.5KW and 3KW motors are available, and the powerful 3kw drive has a wider range of applications. An optional cyclone is used in combination to handle small or light samples.
