ST-1526 Automatic Kinematic Viscosity Tester Introduction
ST-1526 automatic kinematic viscosity tester is developed in accordance with GB / T265 and ASTM D445 standards. It is used to determine the kinematic viscosity of liquid and petroleum products. One-click fast thermostat, oil sample suction, viscosity detection, viscosity value calculation, printing, cleaning of viscosity tubes, drying of viscosity tubes, without manual operation, the instrument completes automatically; widely used in pharmacopoeia, petroleum, chemical engineering, scientific research, metering, Commodity inspection, power and other departments. Features
1.Controller adopts high-speed dual CPU; has high reliability and high measurement accuracy
2.The display adopts the original imported 10.0-inch color touch screen. The graphics and text display are exquisite without jagged, bright colors and high display resolution.
3.Infrared liquid level detection, not affected by any light or light source, the liquid level detection position can be adjusted, which is flexible and free
4.Using imported detection module detection circuit, the detection is fast and accurate, completely avoiding false detection and missed detection
5.Germany imported temperature sensor, sensitive response, higher temperature control accuracy
6.Constant temperature, oil sample suction, viscosity detection, calculation, printing, cleaning of viscosity tubes, drying of viscosity tubes, no manual operation required, the instrument automatically completes all processes
7. 16 sets of preset parameters for selection (preset parameters can be modified to meet special requirements)
8.Users can choose refrigeration equipment to measure low temperature viscosity
9.Full Chinese / English operation interface (optional), built-in high-speed thermal mini printer Technical Parameters
Applicable standards: GB / T265, ASTM D445
Temperature range: room temperature to 120 ° C
Temperature control accuracy: ± 0.01 ℃
Timing accuracy: 0.1s
Resolution: 0.01s
Sample cell: 2 holes
Temperature sensor: PT100 stainless steel probe imported from Germany
Detection method: infrared photoelectric detection
Viscometer specifications: Pinnacle viscometer (standard)
Printer: Thermal printer
Working power: AC 220V ± 10%, 50Hz
Ambient temperature: 5 ℃ ～ 45 ℃
Relative humidity: 10% ～ 80% Rh
Power consumption: 1600W
Introduction
ST-1526 automatic kinematic viscosity tester is developed in accordance with GB / T265 and ASTM D445 standards. It is used to determine the kinematic viscosity of liquid and petroleum products. One-click fast thermostat, oil sample suction, viscosity detection, viscosity value calculation, printing, cleaning of viscosity tubes, drying of viscosity tubes, without manual operation, the instrument completes automatically; widely used in pharmacopoeia, petroleum, chemical engineering, scientific research, metering, Commodity inspection, power and other departments.
