ST-1502 closed mouth flash point tester Introduction
The ST-1502 closed mouth flash point tester conforms to the method specified in GB / T261 "Petroleum Products Flash Point Measurement Method (Closed Cup Method)". After the test sample is heated in a closed oil cup, it generates test oil vapor and forms with ambient air. When the mixed gas is in contact with the flame to produce a flash fire, it is the flash point of the test product. Widely used in petroleum, chemical, power, commodity inspection, colleges, scientific research and other departments. Features
1.The design of the instrument fully meets the requirements of GB / T261 standard
2.Adopting heating furnace, the heating power is continuous, and the power is displayed by the voltmeter.
3.Compact structure design, beautiful stainless steel table
4.Easy operation and accurate test results Technical Parameters
Adaptation standard: GB / T261
Temperature range: room temperature to 370 ° C
Accuracy: ± 1 ℃
Resolution: 1 ℃
Repeatability: ≤ 4 ℃
Ignition mode: automatic gas ignition, manual ignition
Power: ≤600W
Stirring speed: accord with GB / T261 Step A / Step B
Ambient temperature: 5 ℃ ～ 45 ℃
Relative humidity: 10% ～ 80% Rh
Power supply voltage: 220V ± 10% 50Hz
Instrument size: 295mm * 245mm * 250mm
Introduction
The ST-1502 closed mouth flash point tester conforms to the method specified in GB / T261 "Petroleum Products Flash Point Measurement Method (Closed Cup Method)". After the test sample is heated in a closed oil cup, it generates test oil vapor and forms with ambient air. When the mixed gas is in contact with the flame to produce a flash fire, it is the flash point of the test product. Widely used in petroleum, chemical, power, commodity inspection, colleges, scientific research and other departments.
