Introduction This series water quality rapid detecting instrument is based on national standard method, single water detection of physical and chemical indexes of special equipment. It can be widely used in all kinds of drinking water, surface water, groundwater, industrial wastewater and domestic sewage in single tested the quantitative detection of the project.
Features 1. within the standard curve, cooperate with special reagent directly in quantitative detection.
2. measurement results show the concentration and absorbance and transmission ratio.
3. imported super bright led light source and detector.
4. driven by advanced light source and calibration technology. After startup, automatic calibration source to the best state;Ensure a long time stability, accuracy and wider measurement range.
5. low power design, combined with high capacity rechargeable lithium battery, a full charge can work continuously for 7 days, the standby time for 15 days.
6. clear intuitive liquid crystal display and keyboard operation.
7. test data can be stored.
8. Compact design.
Technical parameters 1. light source: super bright LED;
2. measure component: colorimetric tube;
3. detector: photovoltaic converter;
4. measurement methods: quantitative measurement;
5. 100% noise: ≤0.5%τ;
6. 0% noise: ≤0.2%τ;
7. drift: ≤0.4%τ/ 30 min;
8. input/display: LCD screen, thin-film keyboard
9. Overall size: 178 mm x 95 mm x 45 mm;
10. NW: about 400 g
11. detection limit: 1 NTU
12. test range 0 ~ 100 NTU
Introduction This series water quality rapid detecting instrument is based on national standard method, single water detection of physical and chemical indexes of special equipment. It can be widely used in all kinds of drinking water, surface water, groundwater, industrial wastewater and domestic sewage in single tested the quantitative detection of the project.
