Features: 1. With a constant temperature bath, standard 20 ml (1 ml) precision. 2. With a preheating glass tube, placed five 20 ml solution tube, can prepare liquid storage. At the same time, constant temperature barrel can be placed above 200 ml of cartridge case. 3. The constant temperature bath can be split and constant temperature system, convenient for cleaning and replacement. 4. The outer separate independent constant temperature circulation and aeration equipment, excluding air pump and water pump vibration effects on medicine barrels. 5. Gas flow is adjustable, easy to change to use air or oxygen, air or oxygen converter, can be arbitrary switching. 6. One-piece in vitro tissue a hook fixed frame, frame and sensor with high precision fine-tuning, install the tension transducer and in vitro tissue. Move up and down in vitro tissue, sensors and in vitro tissue synchronous movement, does not lead to pull tissue damage. 7. The leakage protection device: yes, the working current of 10 ma 8. Supporting liquid medicine barrels, can be directly collected waste liquid. Technical parameters: Temperature control range: at room temperature to 100 ℃ Heating power: 350 w Time needed for heat from room temperature to 38 ℃ : < 10 minutes Working voltage is AC220V 50 hz: temperature control precision of 0.1 ℃. Temperature control: microcomputer automatic temperature control. Temperature control precision: 0.1 ℃ or less Display precision: 0.1 ℃ Content: the actual temperature and set temperature (at the same time)
1. With a constant temperature bath, standard 20 ml (1 ml) precision. 2. With a preheating glass tube, placed five 20 ml solution tube, can prepare liquid storage. At the same time, constant temperature barrel can be placed above 200 ml of cartridge case. 3. The constant temperature bath can be split and constant temperature system, convenient for cleaning and replacement.
