SPS070V2 high voltage clamp temperature sensor Introduction: Our company has developed a strong electromagnetic field, high current and high temperature for the contact point of the electrical equipment of the outdoor high-voltage line guide wire due to the aging of materials, poor contact, current overload and other factors, and the undetectable faults. SPS070-V2 passive wireless temperature sensor with long-term stable operation. The product adopts ultra-low power design and micro-electromagnetic energy collection technology. It does not require batteries, RF communication, CRC verification and other technologies. It has green environmental protection, maintenance-free, thorough electrical isolation, convenient installation, strong anti-interference ability, reliable operation and volume. Small and other features can solve the temperature measurement problem under high altitude and high voltage conditions. The collected temperature is transmitted to the monitoring terminal through RF communication in real time to achieve uninterrupted and accurate automatic monitoring. The temperature sensor can be installed with the line energized. Our company is also the main drafting unit of the energy industry standard NB/T 42086-2016 "Technical Requirements for Wireless Temperature Measurement Devices". Second, the application area On-line monitoring of outdoor outdoor high-voltage strand lap joints, transformer inlet and outlet lines, cable inlet and outlet lap joints and other outdoor electrical equipment. Technical Parameters: Working environment: -40～85°C, <95%RH Working frequency band: 433MHz (free application) Transmit power: 13dbm Communication rate: 5 kbps Transmission distance: ≥1km (open space) Temperature measurement method: contact type Temperature range: -45～+125°C Measurement accuracy: ±1.0 °C Power supply mode: Electromagnetic energy collection (current 10 ~ 5000A) Measurement interval: 10S Transmission interval: 20 seconds to 100 seconds, the higher the temperature or the sudden change, the shorter the transmission interval Service life: ≥ 10 years Protection level: IP68 Dimensions: φ74*148mm Outer diameter of the clamp: diameter 42mm
Introduction: Our company has developed a strong electromagnetic field, high current and high temperature for the contact point of the electrical equipment of the outdoor high-voltage line guide wire due to the aging of materials, poor contact, current overload and other factors, and the undetectable faults. SPS070-V2 passive wireless temperature sensor with long-term stable operation. The product adopts ultra-low power design and micro-electromagnetic energy collection technology. It does not require batteries, RF communication, CRC verification and other technologies. It has green environmental protection, maintenance-free, thorough electrical isolation, convenient installation, strong anti-interference ability, reliable operation and volume. Small and other features can solve the temperature measurement problem under high altitude and high voltage conditions. The collected temperature is transmitted to the monitoring terminal through RF communication in real time to achieve uninterrupted and accurate automatic monitoring. The temperature sensor can be installed with the line energized. Our company is also the main drafting unit of the energy industry standard NB/T 42086-2016 "Technical Requirements for Wireless Temperature Measurement Devices". Second, the application area On-line monitoring of outdoor outdoor high-voltage strand lap joints, transformer inlet and outlet lines, cable inlet and outlet lap joints and other outdoor electrical equipment.
