Brief introduction: Used to simulate the full sunlight spectrum xenon arc lamp to represent the destructive waves can be under different environment for scientific research, product development and quality control to provide the corresponding environmental simulation and acceleration. Can be used for the selection of new materials, improvement of existing materials or evaluate material composition change after the change of the durability test, can be a good simulation under different environmental conditions, materials exposed to changes in the sun. Technical parameters: Temperature range: RT + 10 ℃ ~ 80 ℃; The board temperature: 63 ℃ + 3 ℃; Temperature fluctuation degree, plus or minus 0.5 ℃ or less; Temperature uniformity: plus or minus 2.0 ℃ or less; The humidity range is 65 ~ 98% RH; Glass filter: 1; Sample pallet size: 251 * 457 mm; Xenon lamp light source: four air-cooled tubes; Rainfall time: 1 ~ 9999 minutes, adjustable; Rain cycle: 0 ~ 240 min, interval (break) rainfall is adjustable; Water cycle (time/time of spray water) : 18 min / 102 min. In the rain water pressure: 0.12 ~ 0.15 Mpa; Spray nozzle aperture: Ф 0.8 mm; Xenon lamp power: 1.8 KW/branch; Heating power: 2 kw; Rack and tube distance: 230 ~ 280 mm; Wavelength: 290 ~ 800 nm;
Brief introduction: Used to simulate the full sunlight spectrum xenon arc lamp to represent the destructive waves can be under different environment for scientific research, product development and quality control to provide the corresponding environmental simulation and acceleration. Can be used for the selection of new materials, improvement of existing materials or evaluate material composition change after the change of the durability test, can be a good simulation under different environmental conditions, materials exposed to changes in the sun.