Product introduction: The traditional ultrasonic crushing instrument with probe is in direct contact with the sample and has metal ion pollution. Only one sample can be processed at a time. The experiment period is long. For multiple samples, the same probe needs to be used repeatedly, which is easy to cause cross-contamination of samples. Since the depth of each probe inserted into the sample is not used, the energy distribution of each ultrasound is different, which affects the repeatability and accuracy of the experimental results. In addition, as the closed system cannot be used, the air fog or foam produced in the ultrasonic process will spread to the environment, causing potential biological hazards. Non-contact ultrasonic crushing device is used for aseptic crushing. The centrifugal tube can interrupt chromosomes and break cells. It is not necessary to operate the probe frequently, each sample is in a separate fully enclosed test tube to avoid cross contamination. It is specially designed for pre-processing of second-generation sequencing DNA samples and chromatin immunoprecipitation experimental samples. Compared with the traditional probe contact type ultrasonic cell crusher, non-contact sample can be broken under the sealed container without infectious flying fog. The ultrasonic probe will not contact with the sample to avoid cross contamination. Multiple samples can be processed at one time with high efficiency. Without wear and slag, each sample was in a single fully enclosed test tube to avoid cross contamination. The temperature of the sample can be maintained at -5 to 100 degrees Celsius. The experimental procedures are standardized, the experimental repeatability is good, and the results are reliable. Product features: Non-aerosol generation - enhanced biosafety for aseptic operation; (e.g., mycobacterium, hepatitis b virus, hepatitis a virus, influenza (including H1N1), SARS virus SAS); Eliminate the risk of cross-contamination of samples; It can break chromosomes and break cells through centrifugal tube. The traditional handheld probe and fixed probe are eliminated. Chinese liquid crystal display, power can be adjusted; With periodic pulse crushing cells, the start and stop time of the pulse can be adjusted, and the adjustable time can be accurate to 0.1 second. Multiple samples can be treated at one time with a wide range of sample treatment; The large LCD screen shows that the program can be set up to store 20 sets of experimental data, with over-temperature, delay and fault protection, as well as independent over-temperature and delay. The fault alarm system protects the test sample to the maximum extent and is easy to operate. Main applications: Instruments are widely used in biology, microbiology, physics, zoology, agriculture, pharmacy, petroleum and other fields of teaching, scientific research, production. For example, cells break up and break down; Protein extraction, nucleic acid extraction; Trim the DNA/RNA; Nanotechnology research; Immunoprecipitation of chromatin; Sample homogeneity, emulsification; Other sample processing. Technical parameters: Model: SM – 1500W Frequency (KHz) : 20 Power (W) : 1500 Login password protection: yes Centrifugal pipe clamps (standard) :(0.1-2ml)*4 holes Centrifugal pipe clamps (optional) : 0.2ml *8 holes, 5ML*3 holes Input and display mode: touch control (4.3 "TFT") Sample temperature can be adjusted (℃) : - 5-100 (with low temperature thermostat required) Protection device: self-diagnosing function, automatic error correction, overload, overtemperature protection display, etc Optional: computer online function, 20 sets of data storage, printing, automatic speaker
Product introduction: The traditional ultrasonic crushing instrument with probe is in direct contact with the sample and has metal ion pollution. Only one sample can be processed at a time. The experiment period is long. For multiple samples, the same probe needs to be used repeatedly, which is easy to cause cross-contamination of samples. Since the depth of each probe inserted into the sample is not used, the energy distribution of each ultrasound is different, which affects the repeatability and accuracy of the experimental results. In addition, as the closed system cannot be used, the air fog or foam produced in the ultrasonic process will spread to the environment, causing potential biological hazards. Non-contact ultrasonic crushing device is used for aseptic crushing. The centrifugal tube can interrupt chromosomes and break cells. It is not necessary to operate the probe frequently, each sample is in a separate fully enclosed test tube to avoid cross contamination. It is specially designed for pre-processing of second-generation sequencing DNA samples and chromatin immunoprecipitation experimental samples. Compared with the traditional probe contact type ultrasonic cell crusher, non-contact sample can be broken under the sealed container without infectious flying fog. The ultrasonic probe will not contact with the sample to avoid cross contamination. Multiple samples can be processed at one time with high efficiency. Without wear and slag, each sample was in a single fully enclosed test tube to avoid cross contamination. The temperature of the sample can be maintained at -5 to 100 degrees Celsius. The experimental procedures are standardized, the experimental repeatability is good, and the results are reliable.
