Brief introduction: Type SJG - 702 multi-parameter water quality monitor, is designed for field and field installation. At the same time monitoring the pH, electrical conductivity (TDS) value, turbidity, residual chlorine, temperature, pressure (optional). The monitoring system is suitable for tap water monitoring, building water tank, water pipe network, beverage industry and regulators on the water quality monitoring, to provide reliable data for water quality management and intelligent management. Features: 1. The test several parameters at the same time, multi-usage; 2. Support the wired or wireless transmission monitoring data (format consultation including APP); 3. Monitoring time and interval time any Settings 4. The mains and solar power to choose 5. Small amount of maintenance and the reagent cost is low; 6. Chassis protection grade reaches IP65, can prevent the water spray and dust intrusion. Technical parameters PH: 0.00 ~ 14.00 PH TDS, 0.00 ~ 1000 mg/l Turbidity: 0.00 ~ 20.00 NTU Residual chlorine: 0.00 ~ 20.00 mg/l Pressure: 0.00 ~ 1.6 Mpa (optional) Automatic temperature compensation scope (0 ~ 50 ℃);
Brief introduction: Type SJG - 702 multi-parameter water quality monitor, is designed for field and field installation. At the same time monitoring the pH, electrical conductivity (TDS) value, turbidity, residual chlorine, temperature, pressure (optional). The monitoring system is suitable for tap water monitoring, building water tank, water pipe network, beverage industry and regulators on the water quality monitoring, to provide reliable data for water quality management and intelligent management.
