SIN-P300 diffused silicon pressure transmitter Introduction: The diffusion silicon pressure transmitter adopts imported high-precision and high stability pressure sensitive chips. The sensitive chip adopts advanced micro mechanical etching technology, which diffuses four high-precision resistors on the silicon wafer to form a Wheatstone bridge. Due to the piezoresistive effect, the resistance values of the four bridge arm resistors change, causing the bridge to become unbalanced, and the sensitive component outputs an electrical signal corresponding to the pressure change. The output electrical signal is compensated by an amplification and non-linear correction circuit to generate voltage and current signals that are linearly proportional to the input pressure. CN8 Features: 1. Small size, high performance 2. Imported high-precision core, high stability, low drift 3. Internal glue sealing treatment can adapt to strong vibrations during mechanical processing, making it more durable and reliable 4. Multiple installation forms: metric, imperial, and American threads, clamps, flange connections, customizable 5. IP65 waterproof and dustproof, with waterproof sealing at the outlet, and can also be made into IP68 models Technical parameters: Product model: SIN-P300 Accuracy level: 0.2 level, 0.25 level, 0.5 level optional Thread specifications: M20 * 1.5, M16 * 1.5, G1/2, G1/4, NPT1/2, NPT1/4 Range: -0.1MPa0-10kPa.60MPa Output signals: (4-20) mA, (0-10) V, (0-5) V, (1-5) V, RS485 Pressure types: gauge pressure, absolute pressure, sealing pressure Working temperature: (-20~85) C Protection level: IP65 Response time: Current and voltage output type pressure ≤ 10ms (rising to 90% FS) RS485 output pressure ≤ 100ms (rising to 90% FS) Zero point output temperature drift: ± 0.3% FS/10 ℃ Long term stability: ± 0.2% FS/year Power supply method: (4-20) mA output (10-32) V; (0-10) V output (12-32) V; (0-5) V output, (1-5) V output, RS485 output (8-32) V; (4-20) mA output with LCD 4-bit digital display head (17-32) V; RS485 output with 8-segment digital tube 4-digit digital display meter head (5-28) V Overload pressure: (0.035-10) MPa (150% FS) (10~60) MPa (125% FS)
Introduction: The diffusion silicon pressure transmitter adopts imported high-precision and high stability pressure sensitive chips. The sensitive chip adopts advanced micro mechanical etching technology, which diffuses four high-precision resistors on the silicon wafer to form a Wheatstone bridge. Due to the piezoresistive effect, the resistance values of the four bridge arm resistors change, causing the bridge to become unbalanced, and the sensitive component outputs an electrical signal corresponding to the pressure change. The output electrical signal is compensated by an amplification and non-linear correction circuit to generate voltage and current signals that are linearly proportional to the input pressure. CN8