SHUX-7000 Radioactive Water Sample Evaporation, Concentration and Acid Purging Apparatus
Introduction: The traditional radioactive water sample pretreatment process, including sampling, concentration, transfer, washing, contracting, ashing, weighing, etc., the sample volume during concentration and heating should not exceed 1/2 of the beaker, and the heating temperature is required to be low. The boiling and concentration steps need to be transferred many times, and the operation must be careful and careful. The entire water sample pretreatment process is quite long and complicated, which brings a lot of inconvenience to the experimenters. According to the national standard method, the Shunxin 7000 series of radioactive water sample evaporative concentration and acid removal instrument realizes the evaporation and concentration of various samples to remove the acid without personnel, which greatly improves the efficiency of the experiment, and there is no transfer process, no sample loss, and safe and efficient operation of the experiment. Features: National standard method, multi-channel independent operation, automatic completion of the process of sample concentration and acid removal; Single hole single control, carbon fiber heat source, good corrosion resistance and thermal conductivity, no boiling splash, stable concentration; Multi-channel automatic sampling, quantitative concentration, computer control, no need for human intervention on duty; The whole machine is protected against corrosion, acid and high temperature to ensure long-term stable operation. The pipeline is automatically cleaned without manual intervention. Automatic salting and burning, automatic cleaning, high efficiency, humanized control; With power-off protection function, the current working status is automatically memorized, and the call continues to the current task technical parameter: Heating unit: single hole single hole, 10 channels of sample concentration at the same time Container: Compatible with 200/150/125ml porcelain evaporating dishes of different specifications Quantitative accuracy: <2%ml Setting of the total amount of injection: each channel can be independently controlled within 60L Sampling mode: dual mechanical arm rotating sampling Sulfation: automatic acid addition; high temperature to drive acid Power-off protection: automatically save data and continue tasks when incoming calls Discharge: Automatic waste discharge and cleaning without manual intervention
Introduction: The traditional radioactive water sample pretreatment process, including sampling, concentration, transfer, washing, contracting, ashing, weighing, etc., the sample volume during concentration and heating should not exceed 1/2 of the beaker, and the heating temperature is required to be low. The boiling and concentration steps need to be transferred many times, and the operation must be careful and careful. The entire water sample pretreatment process is quite long and complicated, which brings a lot of inconvenience to the experimenters. According to the national standard method, the Shunxin 7000 series of radioactive water sample evaporative concentration and acid removal instrument realizes the evaporation and concentration of various samples to remove the acid without personnel, which greatly improves the efficiency of the experiment, and there is no transfer process, no sample loss, and safe and efficient operation of the experiment.
