- Model NumberSH0248C
- Brand NameSDSTYQ
- Payment TermsT/T, paypal
Brief introduction:
SH0248C of solidifying point cold filtration point tester is based on national standard national standard GB/T510 solidifying point measurement of oil products and the national standard GB/T3535 "pour point determination method of oil products and on the basis of SH/T 0248, adopt modern advanced technology, mechanical, optical, electronic and computer technology into an organic whole, can be done automatically condensation point, pour point and cold filtration point of petroleum products testing, the instrument adopts photoelectric detection technology, automatic inclined glass tube method, imported compressor refrigeration system to ensure that meet the requirements of refrigeration and depth.
Standards: GB/T510, GB/T3535, SH/T 0248
1. Upgraded to 7-inch TFT color LCD display;
2. Refrigeration mode: fully enclosed and highly efficient refrigeration compressor.
3. Two cold traps for the test.
4. Detection method: spectral detection
5. 199 sets of historical data can be stored after upgrading for easy query;
At the same time, U disk output function is optional.
6. Standard micro printer for automatic measurement and printing
7. After the completion of the test, if there is no operator, set the automatic closing time of the refrigerator arbitrarily within 0-50min to avoid frequent opening of the compressor and extend the service life of the instrument.
8, test interval: cold filtration point 1 ℃ solidifying point 2 ℃, pour point 3 ℃.
9. Temperature sensor: imported Pt 100 stainless steel probe
10. Refrigerating medium: metal bath
Technical parameters:
1, the temperature measurement range: - 68 ~ 50 ℃;
2. Pressure measurement range: 0 ~ 200.0KPa;
Resolution 1 pa
3. Number of test samples: 2
4. Temperature measuring element: PT100
6. Refrigeration mode: compressor refrigeration
7. Cooling mode: air cooling
8. Printing: 20 lines of Chinese dot matrix printing
9. Display: 128 x 64 Chinese characters display
