SDT600-3 online alcohol concentration meter Introduction: The SDT600-3 alcohol concentration meter is based on the special law of the Coriolis force in the motion liquid. The Coriolis force has a correlation with the density of the liquid, thus measuring the density of the liquid; The relationship between density and concentration gives a concentration value at a temperature of 20 °C. This principle has high stability, high precision, long-term stability, and no drift from the sensor. Widely used in the wine industry. Features: 1. 4-wire transmitter with integrated structure, 4-20mA output, easy maintenance 2, the concentration value 0-100.0% (20 °C) display, 1 decimal place; five-digit density value real-time display, four decimal places; current and temperature real-time indication 3, can directly enter the instrument menu to set parameters 4, easy to install and use, the flange surface contact liquid can display the reading. 5, used in fluid or stationary liquid, suitable for installation in pipeline installation or container wall, etc. 6, with pure water calibration calibration, measured value fine-tuning and temperature compensation function 7, continuous online measurement without process interruption, can be directly used in production process control. 8. The contact liquid parts are all 316 stainless steel material or Teflon, which is safe, hygienic and has good corrosion resistance. Technical Parameters: Output signal: 4~20mA Power source: 24VDC (external resistance element cannot be loaded) Concentration range: 0~100% (20°C), can be calibrated to a certain range according to usage Density range: 0~3g/ml, can be calibrated to a certain range according to usage Concentration accuracy: 0.3%, resolution: 0.1%, repeatability: 0.2% Density accuracy: 0.001 g/ml, resolution: 0.0001, repeatability: 0.0005 Explosion-proof grade: Explosion-proof Exia II BT4 Working pressure: <0.6Mpa Medium temperature: 0~60°C (liquid) Ambient temperature: -40~85°C Medium viscosity: <1000mpa•s Electrical interface: M20X1.5 Process interface: DN50 flange or other Liquid contact parts: 316 stainless steel (or Teflon)
Introduction: The SDT600-3 alcohol concentration meter is based on the special law of the Coriolis force in the motion liquid. The Coriolis force has a correlation with the density of the liquid, thus measuring the density of the liquid; The relationship between density and concentration gives a concentration value at a temperature of 20 °C. This principle has high stability, high precision, long-term stability, and no drift from the sensor. Widely used in the wine industry.
