SDS039-FS-H Online Dust Particle Counter Introduction: SDS039 is a dust particle counter based on the principle of single particle laser scattering, which can accurately measure six commonly used particle sizes in the industry, including 0.3 μ m, 0.5 μ m, 1 μ m, 3 μ m, 5 μ m, and 10 μ m. It can monitor the particle size and number of particles per cubic meter in real-time in various dust-free situations. Real time transmission to various intelligent terminals, including computers, for on-site measurement and remote monitoring through standard RS485 interface and Modbus RTU protocol. Widely used in the pharmaceutical industry, electronics industry, food processing industry, precision processing and other clean room environmental testing. characteristic: 1. Reliable operation: All industrial grade devices with high accuracy and long lifespan, capable of continuous operation for 7 * 24 hours 2. Easy to integrate: Small in size, using standard communication protocols, easy to integrate 3. Product serialization: can meet the integration needs of different customers 4. Circuit protection: overcurrent, overvoltage, anti reverse protection, 485 lightning protection 5. Professional design: high-power long-life light source, multiple lens optical solutions, multi-channel standard particle calibration 6. Wide range of applications: Multiple material casings with a wide range of usage scenarios, optional screen configuration 7. Sampling flow rate: There are two sampling methods available: fan/air pump, with a standard of 2.83L/min Technical parameters: Maximum sampling concentration: 4000000 units/ft3 Output channels: 0.3 μ m, 0.5 μ m, 1 μ m, 3 μ m, 5 μ m, 10 μ m Power supply: DC12V [9-25VDC] Rated power: 3W Working temperature range: -20~60 ℃ Working atmospheric pressure: 86KPa~110KPa Response time: 1 second Communication method: RS485+UART TTL Communication protocol: Modbus RTU Lifetime: 3 years Counting efficiency: 0.3 μ m/50%,>0.45 μ m/100% (according to ISO21501) Product size: 173 * 104 * 63mm Flow rate: 2.83L/min
Introduction: SDS039 is a dust particle counter based on the principle of single particle laser scattering, which can accurately measure six commonly used particle sizes in the industry, including 0.3 μ m, 0.5 μ m, 1 μ m, 3 μ m, 5 μ m, and 10 μ m. It can monitor the particle size and number of particles per cubic meter in real-time in various dust-free situations. Real time transmission to various intelligent terminals, including computers, for on-site measurement and remote monitoring through standard RS485 interface and Modbus RTU protocol. Widely used in the pharmaceutical industry, electronics industry, food processing industry, precision processing and other clean room environmental testing.
