SCH-01 type autosampler Introduction: The SCH-01 automatic sample injector is an auxiliary device that supports continuous automatic measurement of multiple samples or reproducible measurement of single sample results. With sample positioning, cleaning, stirring and other functions, it can be perfectly used with a new generation of automatic titrator, a new generation of pH meter, ion meter, conductivity meter, and multi-parameter analyzer, which is very convenient for continuous measurement and titration of multiple samples. Features: 1. Single sample cup turntable, 12 cup positions, one of which is a fixed cleaning position, which can meet the automatic titration of 11 samples 2. Suitable for different sample volumes: the maximum capacity of the titration cup is 120mL; each sample cup is more suitable for 75±10ml sample titration; 3. Support dynamic spray cleaning to ensure thorough cleaning; 4. Supports two modes of stirring up and stirring down, the stirring speed is optional; 5. Has a good man-machine interface, LCD display, key operation, support the machine direct control, operation and display; 6. With USB and RS232 bidirectional communication interfaces, it can meet a variety of communication connection methods; 7. Support multiple baud rate communication; 8. With self-test and fault tolerance function; 9. Support firmware upgrade, allowing function expansion to meet the special requirements of specific users.
Introduction: The SCH-01 automatic sample injector is an auxiliary device that supports continuous automatic measurement of multiple samples or reproducible measurement of single sample results. With sample positioning, cleaning, stirring and other functions, it can be perfectly used with a new generation of automatic titrator, a new generation of pH meter, ion meter, conductivity meter, and multi-parameter analyzer, which is very convenient for continuous measurement and titration of multiple samples.
