Brief introduction:
The Biolot series protein purification system is a simple and efficient chromatographic system, which can be used to rapidly purify the target products, such as protein, peptide and nucleic acid, from mg to g level. The hardware of the system consists of PEEK pump, UV detector, conductance / PH detector, etc. Automatic distillate collectors, mixers and valves are used in conjunction with bioview software, chromatographic columns and fillers to meet any purification challenge. The system has flexible configuration, supports all kinds of chromatography technology, and meets the requirements of the customers to develop the purification process from small scale to pilot scale. Product performance:
Rapid separation of protein, polypeptide and other biological macromolecular compounds
Highly flexible modular configuration to make the research process more intuitive
High precision piston pump, high stability, low pulse
High sensitivity on-line detection, can be equipped with UV pho, conductance, differential refraction and other detectors, etc.
Flow path for PEEK material, good biological compatibility
The pump head has the function of automatic cleaning to avoid the residual buffer solution and precipitate the crystal
Automatic distillate collector, with various collection modes, can be configured with a variety of specifications collection tube
Standard gradient program, the customer can be reset according to the need of the experiment
Storage and execution chromatographic separation method
Highly intelligent operating system, simple and convenient to use
The control software meets the requirements of "FDA 21 CFR Part 11 Authentication" Technical parameters:
No. 1: Biolot 100
System pump: peek piston pump (high precision, low pulse)
Velocity range: 0.01-100ml / min
Velocity accuracy: ±0.5%
Pressure range: 0-20Mpa
Pressure fluctuation: ≤ 0.2MPa
Gradient type: step, linear gradient, can be modified on line
Minimum gradient adjustment: ±0.5S (double pump)
Detector light source: imported deuterium lamp tungsten lamp (system automatic switch lamp source)
Detection wavelength: 190Nm (two-wavelength simultaneous detection)
Wavelength accuracy: ±1nm
Absorbance range:-3-3 AU (linear 0--2 AU)
Conductance range: 0-999.9 Ms / r / cm
Ph range: 0-14
Collector: automatic fraction collector
Collection tube holder: 2 x 60 tubes (height 150mm, diameter 15mm)
Collection pattern: normal mode, sequential collection, cyclic collection
Manual sample valve: standard 1ml quantitative ring (optional for various specifications of quantitative ring)
Power source: 85-264VAC 50Hz
Control software: through RS-232 USB, using PC software workstation based on Windows XP/Windows7/ Windows8/ Windows10/, multi-module system control, the design conforms to "FDA 21 CFR Part 11 authentication"
Reference dimensions:
Infusion pump: 370 × 240 × 152mm3
UV detector: 370 × 240 × 152mm3
Electrical conductance / Ph: 370 × 240 × 100mm3
Automatic fraction collector: 355x241 × 320mm3.
Brief introduction:
The Biolot series protein purification system is a simple and efficient chromatographic system, which can be used to rapidly purify the target products, such as protein, peptide and nucleic acid, from mg to g level. The hardware of the system consists of PEEK pump, UV detector, conductance / PH detector, etc. Automatic distillate collectors, mixers and valves are used in conjunction with bioview software, chromatographic columns and fillers to meet any purification challenge. The system has flexible configuration, supports all kinds of chromatography technology, and meets the requirements of the customers to develop the purification process from small scale to pilot scale.
