Brief introduction: In the workshop and testing room, 15 kinds of optional probes are used, which can greatly satisfy the customer's measurement of various shaped surfaces. This product is not only suitable for workshop measurement, but also can meet the requirement of high precision and complexity of the testing room by reasonably selecting accessories and measuring software. Then realizes one machine multi-purpose, enhances the economic efficiency greatly Through years of experience and experiments, we have mastered the accurate adjustment level of the probe, greatly improved the measurement accuracy and extended the service life of the probe. A maximum of 8 probes can be calibrated at one time, which greatly improves the work efficiency when measuring various profiles. The probe has the warning of overforce measurement, which will appear in the control interface. Lt, Lc and R are locked automatically during measurement to prevent errors during measurement. Product parameters: > numeric display unit or numeric and graphical display unit > is available on standard drives and horizontal drives and is highly adaptable to various factory environments > SD drive unit can be connected with lead block probe; >Cutoff wavelength: 0.25mm / 0.8mm / 2.5mm, automatic >Sampling length: 1.75mm / 5.6mm / 17.5mm, automatic > drive length: optional > stores 15 contour data > automatic calibration > USB data output interface, the data can be transmitted to PC, and further processed by ADS software > rechargeable lithium battery, light and portable > Measurement accuracy: ≤±10% (≤±5% after connecting platform) > has the same accuracy as s-scd220 due to the use of the same motion units and the same probe
Brief introduction: In the workshop and testing room, 15 kinds of optional probes are used, which can greatly satisfy the customer's measurement of various shaped surfaces. This product is not only suitable for workshop measurement, but also can meet the requirement of high precision and complexity of the testing room by reasonably selecting accessories and measuring software. Then realizes one machine multi-purpose, enhances the economic efficiency greatly Through years of experience and experiments, we have mastered the accurate adjustment level of the probe, greatly improved the measurement accuracy and extended the service life of the probe. A maximum of 8 probes can be calibrated at one time, which greatly improves the work efficiency when measuring various profiles. The probe has the warning of overforce measurement, which will appear in the control interface. Lt, Lc and R are locked automatically during measurement to prevent errors during measurement.
