RTS112R5L-Y multi-function total station (mine) Introduction: RTS112R5L-Y is a multi-patent multi-functional total station. The use of this product makes it impossible to carry out engineering measurement when working underground in a well or tunnel without a light, without using a ladder to hang a hammer ball. The instrument is high and is not afraid of the measurement of the ventilation effect of the roadway. Make engineering measurements in underground or tunnels more reliable and more accurate. In actual use, the point accuracy is improved by one level, the station building speed is increased by 3 times, and one staff member can be reduced. Features: 1, the upper and lower laser point alignment Compared with the optical down point, in the dark roadway, the laser can quickly perform the alignment of the ground point; the laser on the point eliminates the inconvenience of hanging the hammer ball at the top of the roadway. 2, dedicated on the point to observe the eyepiece, the instrument can be measured With a dedicated top-to-point viewing eyepiece, point markers and laser points can be observed at the same time to ensure accurate alignment. The instrument has a high-precision prism-free ranging function of 0.3m, which can measure the instrument height (top-to-point) more accurately and faster than the steel ruler. 3, the buttons and panels are backlit, no longer in the dark to operate The traditional total station only has the backlight function of the display screen. In the dark environment, if you need to operate the instrument keyboard, you need to be very familiar with the instrument. This instrument uses transparent buttons and a hollow panel. The numbers on the buttons and the characters on the panel are clearly visible under the illumination of the backlight. Let the operator no longer explore the darkness. 4. The telescope is equipped with a "dot-circle" cross-hair reticle, which can effectively improve the aiming accuracy and measurement speed with special prisms. The traditional total station differentiation plate is in the style of a crosshair, and it is difficult to implement an accurate sight when aiming at the target. The center of the reticle of the instrument is a small point and a small circle. The center point is used to coincide with the target at a close distance, and the small circle at a long distance is used to meet the target. Especially when selecting a special target, you can use the circle to capture the center point of the target to achieve accurate alignment. More accurate than traditional crosshairs. 5, optional underground engineering special measurement target The target can be freely stretched and can be up to 1.2m, which can be applied to roadways of different heights. The top of the target is made of a magnetic substance, which can be adsorbed on the iron mark, and the vertical weight is ensured by the weight of the target. Not only is the fixed point fast, but also the measurement target is high. The logo comes with a light source, no longer need to specialize for the target 6, the instrument has lighting in many places The coarse sight and the centering level are illuminated by the long and round level; the centering, leveling and aiming can be quickly performed in no dark environment. Technical Parameters: Telescope: Imaging: Orthographic Field: 1°30′ Effective aperture of objective lens: Φ45mm Resolution: 3.5′′ Magnification: 30 × Shortest line of sight: 1.0m Ranging: Accuracy: ±(2mm+2×10-6•D) Distance measurement: 500m / prism free 800m / reflector RP60 1200m/mini prism 5000m/single prism Angle measurement: Angle measurement method: absolute coding Angle measurement accuracy: 2′′ Minimum reading: 1′′/5′′ Compensator: Compensation range: ±3' Power supply: Operating voltage: 7.4V DC (rechargeable lithium-ion battery) Working time: ≥ 24 hours Other: Display: dot matrix LCD display on both sides Lighting: LCD lighting, backlighting, blisters, coarse aiming, front lighting Communication: RS-232C/USB Memory: 120000; SD card (optional) Waterproof and dustproof: IP66
Introduction: RTS112R5L-Y is a multi-patent multi-functional total station. The use of this product makes it impossible to carry out engineering measurement when working underground in a well or tunnel without a light, without using a ladder to hang a hammer ball. The instrument is high and is not afraid of the measurement of the ventilation effect of the roadway. Make engineering measurements in underground or tunnels more reliable and more accurate. In actual use, the point accuracy is improved by one level, the station building speed is increased by 3 times, and one staff member can be reduced.
