Introduction: Equipment introduction The measured material is added to the mixing chamber, the material by the different speeds, the opposite direction of rotation of the two rotors exert force, the torque module by torque sensor measured this reaction force, through the computer software processing, drawn The change of torque over time. Applications: Formulation design; quality inspection of raw materials; testing of PVC melt properties; plasticizer absorption testing of PVC dry blends; thermal / shear stability testing of materials; determination of cross-linking properties of XLPE cross-linked polyethylene materials. Features: 1 test conditions close to the actual processing of materials 2 optimized heater structure and cooling air duct design, temperature control more accurate 3 modular design, easy to operate, easy to disassemble, easy to clean 4 electronic overload protection device, safe and reliable 5 non-contact high-precision active torque sensor, accurate measurement results, good repeatability Technical Parameters: Model: RTOM-55/20 Chamber volume: 55 cm3 Rotor speed ratio 2: 3 Torque measurement range: 0-200 Nm Torque measurement accuracy: 0.5% F.S Melting temperature precision measurement: ± 0.1 ℃ The highest test temperature: 350 ℃ Heating / cooling method: electric heating / compressed air cooling Total power: 1.5 kW Total mass: 300 kg Length × width × height: 840 × 690 × 1300 mm
Introduction: Equipment introduction The measured material is added to the mixing chamber, the material by the different speeds, the opposite direction of rotation of the two rotors exert force, the torque module by torque sensor measured this reaction force, through the computer software processing, drawn The change of torque over time. Applications: Formulation design; quality inspection of raw materials; testing of PVC melt properties; plasticizer absorption testing of PVC dry blends; thermal / shear stability testing of materials; determination of cross-linking properties of XLPE cross-linked polyethylene materials.
