Brief introduction: Testing machine is mainly used for non-metallic materials in conventional performance test of tensile, compression, bending at room temperature and in conventional performance test of the creep under high and low temperature, etc; If equipped with corresponding accessories, can also do other test methods of performance test, such as shear, peel, tear, etc. Product manufacturing and inspection standard GB/T16491 the electronic universal testing machine; GB / 2611 "tester general technical requirements" Technical indicators: 1. The test force Biggest test force (kN) : 5, 10, 20 and 50 specifications Effective load range: 0.4% 100% FS (not step inside and outside) Bian: 1/240000 Relative error value: plus or minus 0.5% 2. The test speed Speed adjusting range: 0.001 to 500 mm/min (stepless speed regulation) Speed relative error: plus or minus 0.5% Well test force rate, uniform deformation rate control range: 0.01% ~ 5% FS/S Well test force rate, uniform deformation rate control error: plus or minus 0.5% Constant test force, constant deformation control range: 0.5% ~ 100% FS Constant test force, constant deformation control error: less than 10% for the value plus or minus 1% FS More than 10% for value plus or minus 0.1% FS 3. The displacement (mobile beam) Measuring range: 0 ~ 999 mm Resolution: 0.001 mm Relative error value: plus or minus 0.5% 4. Deformation (room temperature) Range: 50 mm (or) according to the needs of user Output (for) the range: 0-5 mm (or) according to the needs of user Effective range: 0.4% ~ 100% FS Resolution: 0.008 mm Relative error value: plus or minus 0.5%
Brief introduction: Testing machine is mainly used for non-metallic materials in conventional performance test of tensile, compression, bending at room temperature and in conventional performance test of the creep under high and low temperature, etc; If equipped with corresponding accessories, can also do other test methods of performance test, such as shear, peel, tear, etc. Product manufacturing and inspection standard GB/T16491 the electronic universal testing machine; GB / 2611 "tester general technical requirements"
