Sales RS1600S3 Cylindricity measuring instrument，Manufacturer

Position: Home > > Measurement instrument > Surface measuring instrument > Roundness / cylindrical instrument > RS1600S3 Cylindricity measuring instrument for Cylindrical parts

RS1600S3 Cylindricity measuring instrument for Cylindrical parts

Product ID：CLBMydy003

Price: Please inquire PDF Format

Supply Ability:20SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberRS1600S3

Brand NameYIMA

Payment TermsT/T, paypal

Product features:
1,The most advanced compensation algorithm, the accuracy of the Z axis compensation.
2,Taper (cone) can be measured.
3,Air flotation system, the accuracy of the long.
4, The precision grating counter is used to count all the shafts.
5, The key parts adopt special stress alloy material and special stress treatment process, and the precision is kept for a long time.
6, High precision data acquisition and control system, production and acceptance of all of the circuit design of the control system, according to the military standard.
Introduce :
RS series of roundness measuring principle with the instrument function; function contains roundness instrument; the shaft adopts imported precision grating counting
Measure function :
Circular cylinder,circular degree,Straightness,Radial single beat,Radial full beat
,Axial single beat,Coaxial degree,taper,Parallelism, wall thickness difference, concentric degree, planar degree, Parallelism, wall thickness difference, concentric degree, planar degree
Product configuration sheet:

Cylindrical gauge		Model :RS1600S2
Rotary table	Rotation accuracy	(0.05+6H/10000)μm
	Rotating speed	6rpm
	Working table effective diameter	180mm
	Maximum workpiece diameter (diameter)	470mm
	Maximum measuring diameter	280mm
	Maximum load bearing	25Kg
Vertical axis (Z axis)	Vertical movement	280mm
	Maximum detection height (off the rotating table)	280mm
	Maximum detection depth	100mm(Minimum inner diameter:30mm)
	Straightness (narrow range)	0.2μm/20mm
	Straightness (full range)	0.5μm/100mm
	Parallel to the spindle	0.5μm/100mm
	Column ruler	Grating ruler(Resolution:0.001mm)
Horizontal axis (X axis)	Horizontal movement	165mm
	Outstanding amount	25mm
	Horizontal movement mode	electric
	Contact method	Self contact
Probe head	Measure range	±300μm
	dynamometry	70-100mN
	Standard needle	Ruby ,Φ2mm
	Direction of measurement	Double direction
	Angle adjustment	±45°
Circle sample	Acquisition device	Circular grating
Circle sample	Circle sample points	8192 point
Data analysis	Cylindrical function	2~10 cross section, 3 evaluation methods
	Reference datum for cylindrical degree evaluation	LSCY,MZCY,MICY,MCCY,OSCY
	Circular degree evaluation of reference circle	LSC,MZC,MIC,MCC
	Straightness	vertical direction
	beat	radial single beat ,Radial full beat,Axial single beat
	Coaxial degree	Shaft element
	Taper	Diameter variation in the range of sensor
	Other function	Concentric degree,Wall thickness difference ,Single section plane,Parallelism
	Measurement band	1-15upr,1-50upr,1-150upr,1-500upr, 15-150upr, 15-500upr,50-500upr
	Gap measurement	Yes
Repair function	Column correction	Yes
	Column inclination correction	Yes
	Workpiece tilt correction	Yes
Optional accessories	Computer system	standard configuration PC system
	Output	standard configuration A4 printer
	Three dimensional adjustment table	c
	Precision chuck	standard configuration
	Calibration standard parts	standard configuration
	Standard glass hemisphere	No standard configuration,optional

Product features:
1,The most advanced compensation algorithm, the accuracy of the Z axis compensation.
2,Taper (cone) can be measured.
3,Air flotation system, the accuracy of the long.
4, The precision grating counter is used to count all the shafts.
5, The key parts adopt special stress alloy material and special stress treatment process, and the precision is kept for a long time.
6, High precision data acquisition and control system, production and acceptance of all of the circuit design of the control system, according to the military standard.
Introduce :
RS series of roundness measuring principle with the instrument function; function contains roundness instrument; the shaft adopts imported precision grating counting