Introduction: RH-P5600 Computer Card Bursting Tester is the basic instrument for testing the breaking strength of cardboard and corrugated board. It is used to test the bursting strength of all kinds of cardboard. It conforms to ISO2759, GB / T1539 and TAPPI T807 standards. Features: 1, the use of high-precision pressure sensor, the factory control accuracy of <0.3%, better than the standard provisions of ± 0.5% FS. 2, In addition to measuring the bursting strength in the traditional sense, the instrument can also measure the effective bursting strength after removing the film resistance, which is of great significance to the production and research departments. Our professional design programming team can also upgrade the instrument to ensure that the instrument's leading level. 3, high-quality copper cylinder and precision design and processing of the test system has a good seal and durability, precision screw drive, aluminum panels, high-quality stainless steel measuring head and reasonable design to ensure durability of the instrument. 4, LCD Chinese display, friendly man-machine interface operation. Automated testing, test data with statistical processing, micro-printer output, but also can be connected to the computer operation. When connected to the computer, in addition to automatic memory storage results, but also can display the test burst curve and save. 5, using hand-wheel clamping device, dual high-precision pressure sensor, the United States chip control, the clamping force value and test results can be real-time display. The preset clamping force value makes the test faster and the result more accurate. 6, the instrument set up internal calibration procedures, easy to measure, calibration department (third party) to calibrate the instrument. Calibration, enter the calibration test procedure, the cup won, the interface replaced by the calibration sensor can be displayed error calibration. 7, the user can switch between units kPa and Psi as needed. Technical Parameters Measuring range: (250 ~ 5600) kPa Resolution: 1 kPa Accuracy: ± 0.5% FS Pressure (oil) speed: (170 ± 15) ml / min Sample clamping force: (0 ~ 2000) kPa adjustable Test system sealing: pressure drop within 1min <10% Pmax Power: AC 220V ± 22V, 50Hz Dimensions: 500X280X540 mm Quality: about 47Kg
Introduction: RH-P5600 Computer Card Bursting Tester is the basic instrument for testing the breaking strength of cardboard and corrugated board. It is used to test the bursting strength of all kinds of cardboard. It conforms to ISO2759, GB / T1539 and TAPPI T807 standards.
