RH-3000 computer compression tester Introduction
The RH-3000 computer compression tester is used to test the compressive strength of the corrugated medium and kraft paper in the upright direction. With the various accessories, the vertical strength, bonding strength and flat strength of the board can be tested. Meet the TAPPI T472, JIS P 8126 standards.
Meet the standard GB/T2679.8, GB/T6546, GB/T6548, GB/T2679.6, GB/T451.3, GB/T6547 Features
The instrument is equipped with the corresponding accessories to carry out the following tests:
——Equipped with ring pressure test center plate and ring pressure special sampler for paper and paperboard ring strength test (RCT);
—— equipped with side pressure (adhesive) sample sampler and auxiliary guide block for corrugated board edge compressive strength test (ECT);
- equipped with a peel strength test stand for corrugated board bonding (peeling) strength test (PAT);
- equipped with a flat-pressure sample sampler for corrugated board flatness strength test (FCT);
——Equipped with corrugometer and auxiliary equipment for laboratory flute test (CCT and CMT, which is the vertical or flat compressive strength test for corrugated base paper).
- Equipped with a thickness test pad for paper, cardboard, corrugated board or other sheet thickness tests. Technical parameter
Measuring range: (30~3000)N, resolution 1N
Indication accuracy: indication error ±1%, indication variability ≤1%
Test speed: (12.5 ± 2.5) mm / min
Upper and lower platen parallelism: <0.05mm
Maximum distance between upper and lower platen: ≥70mm
Quality: about 34kg
Dimensions: about 330 × 350 × 510mm
Introduction
The RH-3000 computer compression tester is used to test the compressive strength of the corrugated medium and kraft paper in the upright direction. With the various accessories, the vertical strength, bonding strength and flat strength of the board can be tested. Meet the TAPPI T472, JIS P 8126 standards.
Meet the standard GB/T2679.8, GB/T6546, GB/T6548, GB/T2679.6, GB/T451.3, GB/T6547